high % fast run time?

[shanksy]

gday all, just after advice on the best still to go on a 50 l keg boiler 2200 w elemnt that will give me 95% at fastest possible rate?
all advice greatfully accepted.
cheers

[Kimbo]

Hi Shansky,
a general rule of thumb is the larger diameter your column, the faster the take off rate, provided your element can keep up.
if you can afford a 3" boka, then go for it but if you want speed you will probably want an extra element and a controller.
It all depends on your budget V's Patients ratio ;-)

[MacStill]

gday all, just after advice on the best still to go on a 50 l keg boiler 2200 w elemnt that will give me 95% at fastest possible rate?
all advice greatfully accepted.
cheers

Either a VM or LM in 2" will work on the setup you mention, but as kimbo suggests if you want speed add another element and go for a 3" rig ;-)

[shanksy]

thanks fellas, will be adding extra element asap

[Frank]

:text-offtopic: well..only a little a bit I hope

but (and please excuse me shanksy) re "2" vs "3" boka/ 50l keg heatsource....
what about LPG burners please? I mean, what number of LPG burner 'gasrings' per above column sizes is a suitable ratio (in members' opinion/experience)???