Hi Everyone,
Did my first run of trying a whiskey batch on my pure distilling pot still.
The wash was 2.5kg of light malt and 4.5kg of dextrose.
Did the stripping run and ended up with about 6.5 liters of 45% ABV.
My mistake was not to water this down to below 40% before the spirit run and to have only 6.5L in the 30L Boiler.
The end product was 80% ABV over 13 jars at 300ml each, pretty much no taste at all when watered down to 40%.
So it was pretty horrible.
So my question is can I put this through the Pure Distilling Reflux Still and make some neutral for using essence, or just chuck it down the sink.
Also any tips of what else I did wrong would be great.
Cheers
Andrew