Aussiedistiller, Home Distilling, Moonshine, Home Brew

Please excuse me if already asked.
I have a T500 still and recently got the pot lid for it with the copper condenser.
Is it necessary to get a voltage regulator for this set up or will it be ok for my spirit runs?
Thanks guys in advance.

^:)^

I believe you will grasshopper, you need to be able to control the speed of the boil in the boiler during the stripping run. This enables the harsher spirit to boil first, ( the heads ) it has a lower boiling point. Then you need to allow the hearts to come through steadily without being over powered by the tails. Even if your boiler has a thermostat these don’t work during the spirit run as they simply turn the heating element on and off where as you want the control of the element that a regulator gives you. I am sure others will chime in as my explanations tend to be pretty simplistic as that is all I understand lol

Yep get a power controller definitely makes life easier.

5star have them on special at the moment. Give andrew a call before it ends.

Thanks mate, not familiar with 5 star.
Where are they? I’m in the west.

I’ve read mixed views on this hence trying to get to the bottom of it.
Running the reflux was easy enough, but new to using the pot.
Cheers

Oops, spotted the 5 star in the top corner

:angry-banghead: :laughing-rolling:

BigRig wrote:Yep get a power controller definitely makes life easier.

5star have them on special at the moment. Give andrew a call before it ends.

Hi BigRig, don’t seem to be able to get to the checkout as I need to log in.
Where do you do that?

You should be able to purchase as a guest so dont need to log in.

Tried 4 times with no luck. Will wait till tomorrow and give them a call I guess.
Thanks mate

Here is the post for the power controller on special.
viewtopic.php?f=56&t=14197

grasshoppernt wrote:I’ve read mixed views on this hence trying to get to the bottom of it.
Running the reflux was easy enough, but new to using the pot.
Cheers

My take on it is this. You can run a pot still without a power controller BUT by doing this you have no control over the run. Chances are you will run too fast and your product will smear to buggery.

With some wash / mash bills you are spending good money, time and effort to get a good product. You wouldn't just piss it up against the wall by not running it properly with good cuts. You wouldn't build a Ferrari and put datsun rims on it.

The power controller will give you good control

Thanks mate,
Bit the bullet and registered only to find that it is pick up only when I went to check out!
Will try to find something local I guess.
Don’t mind spending a few bucks to get the extra quality, lord knows I haven’t spent much at Dan Murphy’s in the last couple of years!
Thanks a lot for your input, much appreciated BigRig

Cheers

These are not pickup only .
They are being sent all over the country daily .
Are you using a mobile or desktop ?

Good Morning Grasshopper
Just give Andrew at five star a call, your life will change forever. He is super duper helpful and knowledgeable
There is a reason so many of us rave about his service and quality. The mobile number is there so use it mate, I promise you will not regret it.

I have changed a few settings and you can now checkout as a guest .
Once you fill in your details it will give the option of pickup or delivery

Thanks Stig,
It all worked this morning!
Order is placed :D

Thanks everyone for your help

I’m sure that there will be a few more questions once I start using it :D

Exciting times!

Cheers,

Emil

:handgestures-thumbupleft:
And now the real fun begins