Always Make Cuts and Dispose of Fores

Discuss safety issues here.

Always Make Cuts and Dispose of Fores

Postby BigRig » Mon Oct 11, 2021 1:54 pm

BigRig
 
Posts: 752
Joined: Sun Apr 07, 2019 1:29 pm
Location: Brisbane, QLD
equipment: FSD 4" Mac SSG, 50L Milk Can, 2 x 2400w elements, 35L Digiboil Boiler, Airstill.

Re: Always Make Cuts and Dispose of Fores

Postby The Stig » Mon Oct 11, 2021 2:56 pm

Give moonshine a bad name :angry-banghead:
The Stig
Site Nerd
 
Posts: 18192
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy

Re: Always Make Cuts and Dispose of Fores

Postby bluc » Mon Oct 11, 2021 3:57 pm

Sounds like it was spiked with methanol..
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Always Make Cuts and Dispose of Fores

Postby Lowie » Mon Oct 11, 2021 6:40 pm

It would be handy to be able to buy a cheap methanol tester of sorts just for peace of mind. I didn't realise that Tequila contained methanol purposely. Probably explains the headaches! :?
Lowie
 
Posts: 712
Joined: Sun May 24, 2015 1:32 pm
Location: Crow eater
equipment: 4", 4 plate "Frankenfurter" copper bubbler and blockhead on a 50L 3000W electric boiler, 10000W controller - don't even know why I need that much, all grain HERMS system through 18G HLT keg and 50L mash tun.


Return to Safety Discussion



Who is online

Users browsing this forum: No registered users and 14 guests

x