Aussiedistiller, Home Distilling, Moonshine, Home Brew

Thumper. Just looking for input into this. Do you think it will work. Any input would be appreciated

Haven't ever used one but stuff that I've read would suggest insulation to the pipework and boiler would be a good idea.

Nice work. As long as ya steam input wand goes to the bottom of thumper it will be fine.you wont need power to the thumper unless you want to preheat to bring it online faster.

Being a pot still insulation is not essential but may give better stability when there is wind around.

bluc wrote:Nice work. As long as ya steam input wand goes to the bottom of thumper it will be fine.you wont need power to the thumper unless you want to preheat to bring it online faster.

Yeah the steam input goes to the bottom. I ran today just with a neutral I made for first run in new equipment. I put heat into the thumper just to get it to temp then switched off. It was pulling 78% for most of the run

:handgestures-thumbupleft: