Re: Hi All.
Posted: Thu Oct 09, 2014 1:32 pmOMG!!
^:)^
^:)^
Thanks Mac !!
especially coming from you :happy-partydance:
Page 2 of 2
Posted: Thu Oct 09, 2014 1:32 pmRe: Hi All.
Posted: Thu Oct 09, 2014 1:36 pmRe: Hi All.
Posted: Thu Oct 09, 2014 1:38 pmIt's been a pleasure mate, but seeing it is unreal.... thank you :handgestures-thumbupleft:
Re: Hi All.
Posted: Thu Oct 09, 2014 3:03 pmWOW Never would have thought of that! looks sensational Meathead! ^:)^
Re: Hi All.
Posted: Thu Oct 09, 2014 3:10 pmNice set up Meatheadinc looks good, how many watts of power does that condensor fan take ? might look at that myself as I only have a car radiator not as efficient. :handgestures-thumbupleft:
Re: Hi All.
Posted: Thu Oct 09, 2014 3:44 pmThe AC fan radiator is actually 4 small radiators ( each dual core). I have had it up as 3previousely but currently run it as 2.
1 return line from reflux and pc
2 bypass from pump.
previously I had it set as 3
1 reflux return
2 pc return
3 bypass
The fan moves a lot of air and 4 radiators with 3/8 inlet/outlets ( currently set as two sets of two parallel radiators) I can push a lot of water through it.
my pump is 750w submersible and has huge flow. at max flow= PC 4Lpm RC 4lpm Bypass1 3lmp Bypass2 3lpm. (note this is max flow when tested as 4 radiators with restrictive pipe work. controlled with flow valves during operation PC 2lpm, RC 0-2lpm, Bypass ???? lots )
The AC unit was a 9KW split system thus I believe it should be able to handle near that power with adequate water and air flow.
1 return line from reflux and pc
2 bypass from pump.
previously I had it set as 3
1 reflux return
2 pc return
3 bypass
The fan moves a lot of air and 4 radiators with 3/8 inlet/outlets ( currently set as two sets of two parallel radiators) I can push a lot of water through it.
my pump is 750w submersible and has huge flow. at max flow= PC 4Lpm RC 4lpm Bypass1 3lmp Bypass2 3lpm. (note this is max flow when tested as 4 radiators with restrictive pipe work. controlled with flow valves during operation PC 2lpm, RC 0-2lpm, Bypass ???? lots )
The AC unit was a 9KW split system thus I believe it should be able to handle near that power with adequate water and air flow.
Re: Hi All.
Posted: Thu Oct 09, 2014 3:50 pmMate that cooling system is nothing short of genius. Well Done ^:)^
Re: Hi All.
Posted: Thu Oct 09, 2014 4:34 pmThank you all for the kind words :happy-partydance:
Re: Hi All.
Posted: Fri Oct 10, 2014 2:43 pm:shock: :clap:
Re: Hi All.
Posted: Sun Oct 12, 2014 12:45 amI got bored today, and as I am between ferments, and without new pieces for control freak, I started on my boka head for fores removal for my future gin basket. (below RC) I built this in order to bleed fores / heads before allowing vapour to pass though a gin basket ( above RC)
I coiled some 3/8 tube around some 4" and stood back to admire my work........
Ooooops :angry-banghead:
I forgot to allow for the extra height of the future gin basket :crying-blue:
Maybe I co stretch the coil :oops: :pray:
I coiled some 3/8 tube around some 4" and stood back to admire my work........
Ooooops :angry-banghead:
I forgot to allow for the extra height of the future gin basket :crying-blue:
Maybe I co stretch the coil :oops: :pray:
Re: Hi All.
Posted: Fri Feb 13, 2015 9:27 amWow this is a thread to aim for lol. Everything is just so cool. :clap:
Re: Hi All.
Posted: Fri Feb 13, 2015 10:13 amThanks Mad :music-deathmetal:
Re: Hi All.
Posted: Tue Feb 02, 2016 9:34 amwoopsi...wrong thread....