Hi from Tassie

Say Hi and introduce yourself

Re: Hi from Tassie

Postby Carol » Wed Jun 09, 2021 5:00 pm

Good work on getting the stripping runs done.
I am guessing that they don''t worry too much about temperature correction. I don't think it will matter much in this learning phase as you will doing cuts anyway.
I always find it helpful to make notes of my runs so I can refer back if necessary.

Cheers
Carol
Carol
Mentor
 
Posts: 411
Joined: Thu Feb 14, 2019 1:29 pm
Location: South Australia
equipment: Still Spirits Air Still
FSD 2" Boka (aka Boris)
FSD 2" pot still ( aka Natasha)

Re: Hi from Tassie

Postby Wellsy » Wed Jun 09, 2021 5:30 pm

Just be aware the stripping run will take a lot longer than the stripping run mate , sorry I can’t remember how much longer memory has failed but I am th8nking it was double the amount of normal run time.
Wellsy
 
Posts: 2198
Joined: Sat Aug 22, 2020 7:48 am
Location: Victoria
equipment: FSD 4” Modular Pot Still plus 4 FSD Bubble plates on FSD 50 ltr Milk Can Boiler + 2 x 2400W FSD Element and Guard Kits

Re: Hi from Tassie

Postby Carol » Wed Jun 09, 2021 5:36 pm

Wellsy - I think you mean the spirit run will take longer than the stripping run.
Cheers
Carol
Carol
Mentor
 
Posts: 411
Joined: Thu Feb 14, 2019 1:29 pm
Location: South Australia
equipment: Still Spirits Air Still
FSD 2" Boka (aka Boris)
FSD 2" pot still ( aka Natasha)

Re: Hi from Tassie

Postby Wellsy » Wed Jun 09, 2021 5:59 pm

Absolutely what I mean Carol

I am so pleased someone on here has studied mind reading lol

Sorry guys Carol is bang on the money.the spirit run will take much longer than the stripping run
Wellsy
 
Posts: 2198
Joined: Sat Aug 22, 2020 7:48 am
Location: Victoria
equipment: FSD 4” Modular Pot Still plus 4 FSD Bubble plates on FSD 50 ltr Milk Can Boiler + 2 x 2400W FSD Element and Guard Kits

Previous

Return to Welcome Centre



Who is online

Users browsing this forum: No registered users and 13 guests

x