Welcome Grumps
is it one of these ?
http://puredistilling.com/only issue i think might be the column is a little short but you could extend it pretty easy in the future once you give it a try (and if you think you need to)
i am pretty sure the are a BOKA type design (or close to it, so should work OK)
give it a cleaning run with water / vinegar 1st to make sure it all works and you are sorted for the 1st run
an idea on that turbo might be to quickly split it to two barrels or buckets and add more water but it may already be "to far gone" to worry and just write the "turbo" off as a 1st try. split it to two 25L buckets top up with clean water to 25L and you could add maybe a little more sugar to each (1kg).
use one for a cleaning run the other to practice and the 2nd to create your 1st product
Keep it and then do a TPW and see if you make a judgement on what is "better"
i highly recommend a stripping run then re-running for a spirt run on TPW (or any sugar wash)
yes it takes more "time" but no carbon or other "cleaning" products or complicated "filters" are needed
use small collection bottles
water down each separate and make your cuts
and you will be onto very drinkable neutral :)
let us know how it goes
PS: i would not use the anti foaming agent but the clearing stuff is normally just gelatin based. you could use it but try to wait for the end of fermentation (990 on hydro) before putting it in and a few extra days clearing is always good :)