Try Again
Was thinking (And please feel free to provide as much advice as you can here.)
So I have the keg, but will do the following, (thinkin of turning upside down..... )
1 x 3500W element with controller
4" connection for colum,
4" sightglass/fill port.
thermoport.
Going moduar for sure
Was thinking of 4 x
http://www.aussiedistiller.com.au/downl ... &mode=view500mm packed section
150mm 4" RC with 9 x 3/4 " inners
500mm 2" PC with 5 or 6 depending x 1/2" inners
into parrot.
WTDist if you could flick over the template that would be great.
Professor Green I have a dedicated 15amp circuit in garage for this as well as a 10amp outlet as well.