3" SS/Copper bubbler build

[scottyd72]

A quick question on the diameter of the copper bubble plates...

platesize.jpg

platesize1.jpg

Have I made the plates too big? do they need to be slightly smaller? ( I bought the seals from 5 star a few years ago before I moved) and do you use one seal or two when sandwiching a plate between tees?

I've silver soldered the risers into the plates, just have to attach the caps...

copper plates1.jpg

[iOnaBender]

Hi Scotty,

Those seals look like a full tri clover seal. You want a plate seal, the inner flat piece of rubber up to the bead
is not there on a.plate seal

Cheers

[The Stig]

We don’t do 3” plate seals

[scottyd72]

Hi Scotty,

Those seals look like a full tri clover seal. You want a plate seal, the inner flat piece of rubber up to the bead
is not there on a.plate seal

Cheers

Ah ok I'll go looking for them. Thanks Bender :handgestures-thumbupleft:

We don’t do 3” plate seals

Copy thanks

[The Stig]

You can just use a taser blade to cut the inner lip away from a standard tri-clamp seal

[scottyd72]

You can just use a taser blade to cut the inner lip away from a standard tri-clamp seal

Ah ok thanks ill have a go at it. I’m guessing that i need to cut the diameter of my plates down a bit to fit just inside the seal then?

[The Stig]

Of course that should have been razor blade , stupid auto correct :laughing-rolling:

[scottyd72]

Of course that should have been razor blade , stupid auto correct :laughing-rolling:

Ah auto correct... almost as infamous as the real Stig... :))

[scottyd72]

A little bit of progress today....

I had to make a holding fixture to screw the copper plates to so I could resize them to fit into the seals between the tees...

copper plates lathe1.jpg

copper plates lathe2.jpg

copper plates lathe3.jpg

copper plates lathe4.jpg

Then I soaked them for 2 1/2hours in George from Barley and Hops Brewing YT channels 551 mixture (500ml water, 50ml Hydrogen Peroxide, 1 ounce (28gms) Citric acid powder).

copper plates cleaning1.jpg

Now they are soaking in a weak water/vinegar mix overnight.

[harold01]

You are doing some good shit there, what does soaking them do.

[scottyd72]

You are doing some good shit there, what does soaking them do.

Thanks :handgestures-thumbupleft: :handgestures-thumbupleft: :handgestures-thumbupleft:

It's to clean off the gunk from soldering.

[harold01]

I see said the blind man