by TJM » Fri May 25, 2012 11:56 pm
Hey fellas been a while since i posted so i thought id show you all my new build.
Im still half way there with it but should be great when im done. The still is a 5 perforated plate 4 inch column with shotgun reflux and product condenser. Reflux
condenser is 14 1/2" tubes 100mm long and the product shotgun is 7 1/2" tubes 350mm long in a 3" jacket. Plate holes are 1.5mm and about 260 on each plate.
The sight glasses are going to be 2" triclamps. Each plate is going to be valved so i can change the still mid run to be a 1 - 5 plate still
Any input or comment much appreciated. cheers..
Last edited by
TJM on Sat May 26, 2012 1:16 am, edited 1 time in total.