Crows new still

Perforated & bubble cap plated columns

Re: Crows new still

Postby crow » Sat Jan 19, 2013 11:22 pm

friggen knew it would turn out like that. Had to send it to an alternative addy that always downloads pics small like that I think I can pull the phone apart and put the memory card in this laptop contraption but I'm not real sure how
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Crows new still

Postby kelbygreen » Sat Jan 19, 2013 11:38 pm

fuck me drive to macs house it will be quicker and cheaper (if your car doesnt break down :teasing-tease: )
kelbygreen
 
Posts: 191
Joined: Sat Sep 22, 2012 4:19 pm
Location: Newcastle
equipment: 3" pot

Re: Crows new still

Postby emptyglass » Sat Jan 19, 2013 11:42 pm

That should work. Thats what I have to do to get anything from my phone onto the pc. Nokia shit sux, but nokia was soooo 2011.

You might have to google it. mayby you will need a driver to make it happen. Maybe a pc savvy member might be able to give better directions, I'm an old cunt :violence-smack: .

KG; if he did that, we'd all be able to see "crows new still", as the title suggests. :angry-banghead: :handgestures-thumbupleft:
emptyglass
 

Re: Crows new still

Postby crow » Sat Jan 19, 2013 11:47 pm

far canal give me a chance to put it together first just starting to set the boiler up crikey yaz ave all seen it already ya muppets just click on it an put ya thumb over the thumper ,bingo that's it :-B
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Crows new still

Postby emptyglass » Sat Jan 19, 2013 11:49 pm

Just post a pic, ya muppet
emptyglass
 

Re: Crows new still

Postby Aussiedownunder01 » Sun Jan 20, 2013 6:48 am

Fark mate you can do better than that get a top or bottom rim off a 50 liter keg and get empty to weld it on
You do not have the required permissions to view the files attached to this post.
Aussiedownunder01
 
Posts: 1133
Joined: Tue Sep 11, 2012 7:25 am
Location: So close to melbourne airport you can hear the plains
equipment: 100 litre boiler with a 4 in 5 plate bubbler on top with a 500 packed section standing by if needed

Re: Crows new still

Postby Cane Toad » Sun Jan 20, 2013 9:01 am

So where's the pic of the still Crow :violence-smack: and for fucks sake,call into a tyre shop like Bob Jane,I'm sure you could pick up a decent 17" rim for next to nothing,be a shame to put a nice new bubbler (if we ever get to see it :angry-banghead: ) on a rusty old piece of shit like that :laughing-rolling:
Cane Toad
 
Posts: 2473
Joined: Thu Jul 28, 2011 9:14 pm
Location: ask punkin
equipment: where's my football :(

Re: Crows new still

Postby crow » Sun Jan 20, 2013 9:11 am

ferkin ell thats a classic old FX rim :handgestures-thumbupleft:
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Crows new still

Postby JayD » Sun Jan 20, 2013 9:55 am

yeah but its like trying to bolt a propeller onto an F18... :teasing-tease:
JayD
 
Posts: 1669
Joined: Mon Jul 09, 2012 7:46 pm
Location: Tasmania
equipment: JayD's Copper Worx

Re: Crows new still

Postby crow » Sun Jan 20, 2013 10:04 am

JayD wrote:yeah but its like trying to bolt a propeller onto an F18... :teasing-tease:

yeah well sure that wouldn't look cool and it wouldn't work cool but it would get attention :laughing-rolling: :laughing-rolling: :laughing-rolling:
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Crows new still

Postby crow » Sun Jan 20, 2013 12:50 pm

hmm need another burner , just looking at this , the way I was going to set this up the gas line will get to hot and melt.
guess I'll need one of them 3 or 4 ring burners . I might have to go back to the BD747 for now :twisted:
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Crows new still

Postby Aussiedownunder01 » Sun Jan 20, 2013 1:23 pm

whats a bt747
Aussiedownunder01
 
Posts: 1133
Joined: Tue Sep 11, 2012 7:25 am
Location: So close to melbourne airport you can hear the plains
equipment: 100 litre boiler with a 4 in 5 plate bubbler on top with a 500 packed section standing by if needed

Re: Crows new still

Postby crow » Sun Jan 20, 2013 1:36 pm

This little baby :handgestures-thumbupleft:
viewtopic.php?f=41&t=655
BD Big Don, cupcakes former identity (serious problem identity theft :laughing-rolling: ) and 747 the sound it makes if ya turn it 3/4's the way on
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Crows new still

Postby crow » Sun Jan 20, 2013 6:42 pm

Here sooky la la's better picture . Anyway I cut the tyre off hammered the rust off, belted the rivets out and removed the inside bit fit perfect :handgestures-thumbupleft: who said ya can't make strawberry jam outa pig shit
You do not have the required permissions to view the files attached to this post.
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Crows new still

Postby googe » Sun Jan 20, 2013 8:02 pm

Haha havnt heard sooky la la's for years!!. There a nice rim crow. Good steel to be alive still after all them years!!. Glad it fitted mate. How come you can post pics of the rim and not the still?.
googe
 

Re: Crows new still

Postby emptyglass » Sun Jan 20, 2013 8:54 pm

googe wrote:Haha havnt heard sooky la la's for years!!. There a nice rim crow. Good steel to be alive still after all them years!!. Glad it fitted mate. How come you can post pics of the rim and not the still?.


:text-+1:

:text-worthless:
emptyglass
 

Re: Crows new still

Postby kelbygreen » Sun Jan 20, 2013 9:40 pm

coz he dropped the stilsens on it :laughing-rolling:
kelbygreen
 
Posts: 191
Joined: Sat Sep 22, 2012 4:19 pm
Location: Newcastle
equipment: 3" pot

Re: Crows new still

Postby crow » Mon Jan 21, 2013 12:16 am

jeez you's turkeys remind me of that 10 second Bob c#nt from 50 first dates here ( FFS)
viewtopic.php?f=9&t=2953#p42515
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Crows new still

Postby MR-E » Mon Jan 21, 2013 12:30 am

crow wrote:jeez you's turkeys remind me of that 10 second Bob c#nt from 50 first dates here ( FFS)
http://aussiedistiller.com.au/viewtopic ... 953#p42515


Your not a Politician are you :?: fending us of with B.S :teasing-neener:

Now where's the pics :?:
MR-E
 
Posts: 373
Joined: Tue Jun 12, 2012 4:58 pm
Location: Brisbane
equipment: Cooking on gas,50ltr keg, 3"Bok &
4" column with 6 perf plates

Re: Crows new still

Postby SBB » Mon Jan 21, 2013 11:44 am

crow wrote:who said ya can't make strawberry jam outa pig shit


Theres another side to that story Crow, "You can put lipstick on a pig, but its still a pig"
SBB
Lifetime Member
 
Posts: 2450
Joined: Mon Mar 21, 2011 8:12 pm
Location: Northern NSW
equipment: (The Pelican) a 2 inch pot / stripper on 25L electric boiler interchangable with T500 reflux still...... 2 1/2 inch pot still on 50L keg (gas burner).....
3 inch Boka (half share with Draino),...... 4 inch 4 plate perforated plate Bubbler

PreviousNext

Return to Plated Column Stills



Who is online

Users browsing this forum: No registered users and 93 guests

cron

x