Crows new still

[crow]

Myob ha yeah we used that in fact I have it here but haven't used it for 3 or 4 yrs. I found the fucking picture and ran out of credit while posting, :handgestures-thumbdown: . Can't win a trick lately

[MR-E]

Looks like you have done a bit of work setting that up, looks good :handgestures-thumbupleft:

[googe]

Looks good mate, must be nice having the water plumbed in :handgestures-thumbupleft:

[crow]

Will be better once I get it hooked to the 1000 ltr tank but mains water will have to do for now

[emptyglass]

Shed's looking good!

Sort of looks like you ripped mama's stove out and put a real home appliance in its place :handgestures-thumbupleft:

[MacStill]

Nice set up crow.

Now we can see it I've moved it here :teasing-neener:

[crow]

Ok it was just to hot here to test it today :handgestures-thumbdown: spent the day building shelves so I can empty the old shed as the railway heritage mob are waiting to pull it down (I donated it to them) but not 100 odd litres of low wines stored in there :laughing-rolling:

[emptyglass]

You are suffering from a lack of drinking problem. 100 litres of it, odd.
We can cure that on the weekend....

[Gas on]

Nice crow! thats the goods. :handgestures-thumbupleft: :handgestures-thumbupleft:

[bt1]

Are we there yet?...car fix was clear winner are we there yet?

bt1

[crow]

Nup was too hot to crawl under the car or run the still maybe today

[MacStill]

:angry-tappingfoot:

[crow]

yep was about to test it when I realized the boier had a handful of fillings still in it so just had to pull the whole still down to clean it out :angry-banghead:

[crow]

Ok weird, doing a water run and the only leak I could find is at the keg join, just where ya wouldn't expect it. Ok so ran it a bit harder to make sure there were no others and that one stopped leaking :wtf:

[Yummyrum]

Nice job Crow.

Looks right at home there.

What method of plumbing did you use on your condensers ?

[crow]

copper pipe and some braided flexi hose.
Ok well bottom joint is leaking again , i got it very tight so will have to investigate why :-B

[Yummyrum]

Hope you found the leak.

Thanks Re: the plumbing but I was interested in how you did it .Like is it cold in the Product Condenser and out to the RC then back to the tank or have you separate cold feeds or something different

Cheers.

[crow]

yep bottom join, will fix :handgestures-thumbupleft:

[emptyglass]

:happy-partydance: :happy-partydance: :happy-partydance:

Might want to check the flanges for stillson marks, make sue a pair didnt damage the keg :laughing-rolling: :laughing-rolling: :laughing-rolling:

[crow]

nup I know where it is I just finished wire wheeling it and can see two spots that look like the culprits ;-)