I'm working out the position of my sight glasses at the moment, and I notice in most non-modular columns that the sight glasses are sitting around the level of the plate. ie. The window is in the bath depth...
In my modular pieces (145mm tall), placing them central seems too high and far away from the plate...if I bring them down a little, I need to work out where to put them.
If I put bottom of window at height of the top of the downcomer, will I see anything? Do the bubbles surge higher than this point while they "pulse"?
I'm sure having them lower and in the bath would not affect it in anyway (the distance from column to glass is fairly small), but want to make sure they are not too high and I'm missing the action! :))