Heres the start of something BIG

[dogbreath vodka]

Looking great there mate.
Still waiting on the info regarding your washout port.... waiting, waiting

:-D :-D

DBV

[Aussiedownunder01]

Looking great there mate.
Still waiting on the info regarding your washout port.... waiting, waiting

:-D :-D

DBV

Sorry forgot nothing much to it just a pipe in the top elbow spraying down on top of the reflux condenser then running town through the plates to the boiler where its pumped out to the sink or in the case of a puke I can recycle various grades of water [soap ,citric acid ,vinegar , alcohol ,] I am fortunate to have a commercial sink with hot and cold water on tap

[Aussiedownunder01]

by the time it's built you will have changed the design a bit I'm sure ;-)

I've found that all the preliminary build plans get chucked out the window once you start burning copper, it kinda gets in your blood then & you really start seeing how much you can improve things once you're there.

I'm really looking forward to seeing this rig completed, it's going to be a cracker.... but please dont insulate it with duct tape :laughing-rolling:

There goes another idea down the drain there will be three sections that I would like to insolate ;a 4 port mod section ;a 1 plate mod, and 500 mm packed section from the rc over the top down through the shotty I will leave polished
Ok any ideas and photos of stuff to use

[Aussiedownunder01]

Ok the tower is nearly finished cant be bothered polishing it so as I said before I would like to lag it [helps to cover up the shit soldering also ] [ and mack recons duct tape looks like shit ]
Question what to lag it with
tied the search button with no luck

[Aussiedownunder01]

Ta Darr

[punchy21]

Well done... Gettin' there mate :handgestures-thumbupleft:

[Bushy]

Thats definitely a still. You hard soldered yr plates in. Perf or caps? You'll have to give the girl a soak in somethin to get all that shit off.
Lookin good bloke.
Now get those fermenters workin for ya. And hang those wind chimes out where they can sing ;-)

[Aussiedownunder01]

Thats definitely a still. You hard soldered yr plates in. Perf or caps? You'll have to give the girl a soak in somethin to get all that shit off.
Lookin good bloke.
Now get those fermenters workin for ya. And hang those wind chimes out where they can sing ;-)

They are all macks Perf plates
Those wind chimes not game to hang them would wake the dead :))

[Aussiedownunder01]

Also working on a 100 litre fermenter stainless steel to suit

[dogbreath vodka]

You'll have to give the girl a soak in somethin to get all that shit off.
Lookin good bloke.

:text-+1:
Mate a decent soak and all that crap will come off.... then scrub her up with steel wool and jiff.
You won't want to take your eyes off her.
Would be a real shame to cover that with lagging.

Just my opinion..

DBV

[Aussiedownunder01]

Soldering finished '' I think '' now its bath time :D

[Aussiedownunder01]

Postman just dropped a parcel thanks Mack all go from here :handgestures-thumbupleft:

[Aussiedownunder01]

Here it is in all its glory and the last piece in the puzzle the 500 mm packed section plus a 500 mm extension to the shotty

[Aussiedownunder01]

Finally finished just needs cleaning runs and away we go
Just gave the washout point a run 1/2 fills each glass

[dogbreath vodka]

Hey Aussie.
Nice to see someone has made it to the end of the build :handgestures-thumbupleft:

Notice your parrot is right at sitting level :))
May as well get comfortable I guess :handgestures-thumbupleft:

DBV

[Aussiedownunder01]

i am locked out of the forum why

[Aussiedownunder01]

Tried to post the leftover stuff for the last hour and locked out

[dogbreath vodka]

It happens regularly.
I've been thrown off the site and looking at the list of who was on.... there was my name. WTF?

So you just wait and eventually it sorts itself out.

DBV

[Yummyrum]

Aussie,that is a big fucka.
Well done mate :handgestures-thumbupleft:

What did you finally decide on the polished finish?

[MacStill]

i am locked out of the forum why

So was I for a while, dont panic :laughing-rolling:

The site is going through some upgrades that will cause outages from time time, just hang in there with us and things will be awesome again real soon