Posts in this forum should be a complete method, educational, with pics where applicable,posts made in this area that don't fit this criteria will be moved at mods discretion.
by Potmash Boka » Thu Jun 27, 2013 11:23 am
Here's a pic of the 3 new parrots I've started today. Just realised that I have no flux left, looks like a trip to bunnings. :angry-banghead:
You do not have the required permissions to view the files attached to this post.
-
Potmash Boka
-
- Posts: 295
- Joined: Wed Apr 17, 2013 6:18 pm
- Location: The Shire( with all the Hobbits)
- equipment: 2" pot and 4" thumper, 4" pot, 2" SS reflux, 2.5" Boka. 4" 5 plate bubbler( almost done, need to some bits and to make the column round again). SS boiler, 80L keg, 50L keg and a 30L keg boilers.
Various pieces of copper pipe laying around for future experiments.
by Yummyrum » Thu Jun 27, 2013 1:39 pm
Those parrots don't deserve to be tortured by Bernzomatic Flux.
-
Yummyrum
-
- Posts: 1897
- Joined: Fri Dec 28, 2012 3:19 pm
- Location: Near Coffs
- equipment: Did use Still Spirits Reflux
Now use 50l Keg with Pot head for Rum and Neutral stripping runs on gas .
LM/VM head with 1m packed 2" on Still Spirits boiler for Neutrals.
by Potmash Boka » Thu Jun 27, 2013 2:41 pm
Ended up at a welding joint and got some cigweld flux. :happy-partydance:
-
Potmash Boka
-
- Posts: 295
- Joined: Wed Apr 17, 2013 6:18 pm
- Location: The Shire( with all the Hobbits)
- equipment: 2" pot and 4" thumper, 4" pot, 2" SS reflux, 2.5" Boka. 4" 5 plate bubbler( almost done, need to some bits and to make the column round again). SS boiler, 80L keg, 50L keg and a 30L keg boilers.
Various pieces of copper pipe laying around for future experiments.
by bt1 » Thu Jun 27, 2013 5:33 pm
They kinda look "large"
what volume you planning on them all up?
std. meter is about 16cm so can be done with a 70ml volume and they're fast at that volume.
trust the main body tube is 1" / 25.4mm?
bt1
-
bt1
-
- Posts: 2448
- Joined: Sun Apr 22, 2012 11:56 am
- Location: Adelaide
- equipment: 2 x Glass Bubblers, 5 plate 89mm & 6 plate 110mm
4" 6 plate copper bubbler, 500mm copper packed section
Several pots, custom boiler
14 keg rotating brew setup, fermentation & dispenser fridges.
by Potmash Boka » Thu Jun 27, 2013 5:41 pm
Yeah 1" pipe still have to trim them down. Was thinking 80mL volume, now you said 70mL might have re-adjust my thinking
-
Potmash Boka
-
- Posts: 295
- Joined: Wed Apr 17, 2013 6:18 pm
- Location: The Shire( with all the Hobbits)
- equipment: 2" pot and 4" thumper, 4" pot, 2" SS reflux, 2.5" Boka. 4" 5 plate bubbler( almost done, need to some bits and to make the column round again). SS boiler, 80L keg, 50L keg and a 30L keg boilers.
Various pieces of copper pipe laying around for future experiments.
by bt1 » Thu Jun 27, 2013 5:47 pm
pot,
80ml would be fine...it would still quick at that volume... at 4.5lt - 5lt/hr that's a lag of <1 min....regardless it's the trend it reflects that really helps you drive em.
reckon once they're over that 150ml mark seriously doubt the worth of em as a effective tool...slow as.
bt1
-
bt1
-
- Posts: 2448
- Joined: Sun Apr 22, 2012 11:56 am
- Location: Adelaide
- equipment: 2 x Glass Bubblers, 5 plate 89mm & 6 plate 110mm
4" 6 plate copper bubbler, 500mm copper packed section
Several pots, custom boiler
14 keg rotating brew setup, fermentation & dispenser fridges.
by Yummyrum » Thu Jun 27, 2013 7:41 pm
If by welding you mean brazing ,you don't need any flux ,Copper to copper .Copper to brass,that a different story
-
Yummyrum
-
- Posts: 1897
- Joined: Fri Dec 28, 2012 3:19 pm
- Location: Near Coffs
- equipment: Did use Still Spirits Reflux
Now use 50l Keg with Pot head for Rum and Neutral stripping runs on gas .
LM/VM head with 1m packed 2" on Still Spirits boiler for Neutrals.
Return to Tips From The Workbench
Who is online
Users browsing this forum: No registered users and 59 guests