Another Mod with Justlearning

Boiler, burner and boiler modification talk.

Another Mod with Justlearning

Postby Jono » Thu Jul 16, 2020 11:27 am

Before building the parrot the other night Justlearning and I put this viewing/fill port on my boiler. Done with an elcheapo Tig welder using Mig shield gas instead of pure argon. Turned out pretty good without the proper gas I reckon! Also not bad that the ferrule was from overseas made from 100% chinesium.
You do not have the required permissions to view the files attached to this post.
Last edited by Jono on Thu Jul 16, 2020 11:30 am, edited 1 time in total.
Jono
 
Posts: 42
Joined: Mon Mar 25, 2019 7:47 pm
Location: Central Coast NSW
equipment: 50L Beer keg boiler with two 2.4kw elements, a kegland controller, 2 inch Bokakob aka Billy Bob Boka and Jack the stripper a 2.5inch shell and tube condenser for pot mode or stripping... Building up to getting a 4 inch plate still

Re: Another Mod with Justlearning

Postby justlearning » Thu Jul 16, 2020 11:56 am

someone clearly needs some more welding practice!! :)) :handgestures-thumbupleft:
justlearning
 
Posts: 28
Joined: Tue Mar 12, 2019 9:14 am
Location: ACT
equipment: 2" Reflux Liquid Management with a window
Based on the Carriage Still on this site

Re: Another Mod with Justlearning

Postby Metalsmith » Sat Jul 18, 2020 11:04 am

justlearning wrote:someone clearly needs some more welding practice!! :)) :handgestures-thumbupleft:

Geez, makes my bead look like turkey scratch........

But I am great with a grinder!
Metalsmith
 
Posts: 1
Joined: Sat Feb 16, 2019 6:19 am
equipment: Pot still, gas and electric.


Return to Boilers & burners.



Who is online

Users browsing this forum: No registered users and 25 guests

x