gas leak?

Boiler, burner and boiler modification talk.

Re: gas leak?

Postby Aussiedownunder01 » Sat May 11, 2013 1:42 pm

bt1 wrote:howdy,

Use the same rig 3 ring burner and HP regulator outdoors clearly.

Thought it was getting a bit variable and flame height was all over the place. It would blow out, spit back, vary as it warmed up.

Put that heat shroud round the keg(see post) ... hey presto no more dramas.

I was thinking it was jets, ring rust in holes, HP itself etc etc. ...saved a lot of time and effort.

bt1

Ring rust in your hole that would be painfull :))
Aussiedownunder01
 
Posts: 1133
Joined: Tue Sep 11, 2012 7:25 am
Location: So close to melbourne airport you can hear the plains
equipment: 100 litre boiler with a 4 in 5 plate bubbler on top with a 500 packed section standing by if needed

Re: gas leak?

Postby bt1 » Sun May 12, 2013 8:05 am

Especially for the poor nurse who has to get it out :D

bt1
bt1
 
Posts: 2448
Joined: Sun Apr 22, 2012 11:56 am
Location: Adelaide
equipment: 2 x Glass Bubblers, 5 plate 89mm & 6 plate 110mm
4" 6 plate copper bubbler, 500mm copper packed section
Several pots, custom boiler
14 keg rotating brew setup, fermentation & dispenser fridges.

Re: gas leak?

Postby BareKnuckles » Sun May 12, 2013 11:28 am

A rusty ring is never a good thing :laughing-rolling:

Vert hard on the critical orface :scared-eek:

-BK
BareKnuckles
 
Posts: 30
Joined: Thu May 09, 2013 11:20 am
Location: At the pointy end of the stick.....
equipment: 2 Plate 4" into 2" Hybrid

Previous

Return to Boilers & burners.



Who is online

Users browsing this forum: No registered users and 88 guests

x