Ok,
Im kegged up.
The only other thing ive purchased is a kegking 2400w weldless element (and then read the plethora of bum reviews on said element :angry-banghead: )
What im unsure about is exactly what i need to purchase in order to create a basic electric setup for a 50l keg that encompasses.
1. A drain port.
2. A fill port
And from what ive read, i will need a better setup for the element.
Luckily, my neighbour is handy on the tools, so cuts, welding etc are covered and a sparky mate on the bench if required.
Ive read through the info in this section and there are so many ways to go about keg conversion.
Im not tech savvy, so basically want to write up a shopping list and get it done :handgestures-thumbupleft:
All advice appreciated
Thanks
Woodsy