Cleaning Copper Mesh

High performance modular SS304 plated columns and accessories.

Cleaning Copper Mesh

Postby The Stig » Sat Oct 05, 2019 8:44 am

Lets Talk Cleaning Copper Mesh.
The copper mesh we have these days is nowhere near as oily as the old stuff, we asked the factory to degrease it and they went ahead for us.
This doesn’t mean its clean, we still need to clean the mesh before we use it.
I personally like to use the dishwasher for the first clean (without a tablet) this removes the bulk of whatever it is the factory use to clean it up.
Then I soak in a citric acid solution for 24 hours, agitating every time I walk past.
All I do is buy the citric from Woolworths https://www.woolworths.com.au/shop/prod ... cid-citric
I will add half the container into about 5 litres of water in a bucket.
Drop in the roll of copper mesh.
If I have other copper bits, they go in at the same time.
I leave the bucket in a well-trafficked area and instruct all who walk past to give the bucket a jiggle.
After 24 hours simply rinse really well with water, I user the garden hose so I have pressure and it’s good to go.
There you have it a nice easy way to clean new copper mesh.
If your cleaning used copper mesh you can simply skip the dishwasher part and follow the rest.
Cheers
Andrew
You do not have the required permissions to view the files attached to this post.
Last edited by The Stig on Sat Oct 05, 2019 8:48 am, edited 1 time in total.
The Stig
Site Nerd
 
Posts: 18192
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy

Re: Cleaning Copper Mesh

Postby 1 2many » Sat Oct 05, 2019 6:17 pm

g'day stig, been a long time. i am glad to hear that the supplier is doing the initial clean, the rolls i bought back in 2013 where covered in oil and did take a bit of work to clean.
I also did a fores run to make sure it was good to go. :handgestures-thumbupleft:
1 2many
Lifetime Member
 
Posts: 4215
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: Cleaning Copper Mesh

Postby The Stig » Sat Oct 05, 2019 6:48 pm

Sorry to hear that mate
The Stig
Site Nerd
 
Posts: 18192
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy

Re: Cleaning Copper Mesh

Postby Rolls912 » Sat Oct 05, 2019 11:41 pm

I also find cleaning them in the foreshots and early heads works a treat. Then dishwasher.
Rolls912
 
Posts: 204
Joined: Tue Feb 14, 2017 10:16 pm
equipment: 5SD 4inch Boka
5SD pot still
5SD milk can
Carter head
Charcoal filter
Temp controller

Re: Cleaning Copper Mesh

Postby 1 2many » Sun Oct 06, 2019 8:56 pm

:text-+1:
Rolls912 wrote:I also find cleaning them in the foreshots and early heads works a treat. Then dishwasher.
1 2many
Lifetime Member
 
Posts: 4215
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: Cleaning Copper Mesh

Postby Onlyalittlebitdodge » Tue Oct 08, 2019 1:10 pm

1/2 tspn in the dishwasher at 45 degrees for 30 minutes works reasonably well. even does the rinse cycle :)
Onlyalittlebitdodge
 
Posts: 28
Joined: Sun Apr 30, 2017 8:23 am
equipment: 50L converted keg, 2" copper tower

Re: Cleaning Copper Mesh

Postby stillts » Tue Nov 01, 2022 9:51 pm

ah good! I was washing them in the fores hoping it was ok to do it this way!

I am a little worried. The bucket I was using to soak the mesh in citric acid has broken down a bit and it's hard to tell it the green on the copper mesh is oxidisation or plastic from the (green) bucket. I have given it a good scrub with a brush and then brushed and soaked in fores. Hope it's ok to use.
stillts
 
Posts: 99
Joined: Fri Feb 11, 2022 2:37 pm
equipment: T500 copper reflux still, ez water filter.

FSD 2" Pot Still. 1000L IBL Water reticulation system.

Re: Cleaning Copper Mesh

Postby Wellsy » Wed Nov 02, 2022 4:53 am

Just make sure you have gotten all the plastic off the mesh mate. Probably a great example of why not to use plastic parts with alcohol. You never know what bits will dissolve and what bits you don’t notice dissolving.
Wellsy
 
Posts: 2198
Joined: Sat Aug 22, 2020 7:48 am
Location: Victoria
equipment: FSD 4” Modular Pot Still plus 4 FSD Bubble plates on FSD 50 ltr Milk Can Boiler + 2 x 2400W FSD Element and Guard Kits

Re: Cleaning Copper Mesh

Postby stillts » Wed Nov 02, 2022 9:39 pm

thanks Wellsy. Yeah, you're right. Didn't think it would be a problem as this bucket was where I had the citric acid, but I think I let is soak a little too long....
stillts
 
Posts: 99
Joined: Fri Feb 11, 2022 2:37 pm
equipment: T500 copper reflux still, ez water filter.

FSD 2" Pot Still. 1000L IBL Water reticulation system.

Re: Cleaning Copper Mesh

Postby NoHope » Sat Dec 24, 2022 2:12 pm

After soaking Copper Mesh after a few runs is it supposed to come back to the same sparkly copper colour or be a much duller colour ive soaked it a few times in a mix of citric acid and vinegar when its soaking looks a lot more "brighter" once out and rinsed it changes to a dull colour
NoHope
 
Posts: 80
Joined: Sun Jun 05, 2022 2:49 pm
Location: Northern NSW
equipment: T 500 25Ltr Boiler
4inch modular pot still
50 litre milk can boiler

Re: Cleaning Copper Mesh

Postby The Stig » Sat Dec 24, 2022 3:14 pm

It’ll dull down when dry , nothing to worry about
The Stig
Site Nerd
 
Posts: 18192
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy

Re: Cleaning Copper Mesh

Postby Wellsy » Sat Dec 24, 2022 3:23 pm

If you are really sneaky point it out to the missus, once she starts to worry you can suggest just to be safe you could upgrade to a 4 plate bubbler and then stop using the mess.

It did not work for me but if you time it right when she is full of festive cheer you might have better luck.

Otherwise plus one to what Stig said
Wellsy
 
Posts: 2198
Joined: Sat Aug 22, 2020 7:48 am
Location: Victoria
equipment: FSD 4” Modular Pot Still plus 4 FSD Bubble plates on FSD 50 ltr Milk Can Boiler + 2 x 2400W FSD Element and Guard Kits

Re: Cleaning Copper Mesh

Postby NoHope » Sat Dec 24, 2022 4:17 pm

Nice thought wellsy but just to get the new milk can was pushing it
NoHope
 
Posts: 80
Joined: Sun Jun 05, 2022 2:49 pm
Location: Northern NSW
equipment: T 500 25Ltr Boiler
4inch modular pot still
50 litre milk can boiler

Re: Cleaning Copper Mesh

Postby Wellsy » Sun Dec 25, 2022 6:00 am

Most of us know that feeling mate :)

Now she has an endless supply of future gifts. A second element will make a lovely birthday present lol

Enjoy mate
Wellsy
 
Posts: 2198
Joined: Sat Aug 22, 2020 7:48 am
Location: Victoria
equipment: FSD 4” Modular Pot Still plus 4 FSD Bubble plates on FSD 50 ltr Milk Can Boiler + 2 x 2400W FSD Element and Guard Kits


Return to 5 Star Distilling



Who is online

Users browsing this forum: No registered users and 14 guests

cron

x