Page 1 of 1

Pure Distilling Spirit Maker ????

PostPosted: Wed Dec 30, 2020 8:11 pm
by Andrew
Hi Guys and Gals , Iā€™m looking for somebody local that has a Pure Distilling Spirit Maker who would be willing to bring their column and lid around so I can see if we can add extensions to it .
I will reward with some oak or yeast fir your trouble .
Cheers
Andrew

Re: Pure Distilling Spirit Maker ????

PostPosted: Wed Jan 06, 2021 7:08 pm
by M8Harry
How did you experiments with this go?

Re: Pure Distilling Spirit Maker ????

PostPosted: Wed Jan 06, 2021 7:30 pm
by Andrew
We have 50 adapters on order , should be here in about 3 or 4 weeks

Re: Pure Distilling Spirit Maker ????

PostPosted: Sun Mar 27, 2022 5:14 pm
by Whiskey Baron
With these adapters you have for the Spirit Maker, do they remove the BIG brass lock nut that attaches the Pure Distilling unit to the boiler lid?

I have a Pure Distilling pot still head / unit & I've always been concerned about the big brass nut on the inside of the boiler lid. I don't wanna change the PD pot still head (as I've made some delicious alcohol using it) - I'd like to know if you have an adapter that takes the brass nut out of the equation.

Re: Pure Distilling Spirit Maker ????

PostPosted: Sun Mar 27, 2022 7:14 pm
by bluc
Yes no brass on the adapters..

Re: Pure Distilling Spirit Maker ????

PostPosted: Mon Mar 28, 2022 7:46 am
by The Stig
Thanks Bluc.
But, you will need 2 adapter , the Turbo Lid Adapter as well as the Alcoengine one.
This adapter makes the Alcoengine a Tri-Clamp compatible still so you can connect to kegs etc

Re: Pure Distilling Spirit Maker ????

PostPosted: Tue Mar 29, 2022 11:44 am
by Whiskey Baron
Thanks for the replies guys.

So what / where on the store will I find these 2 adapters? I assume I gotta go the tri-clamp way then - if Im wanting to remove the bad brass nut?

Re: Pure Distilling Spirit Maker ????

PostPosted: Tue Mar 29, 2022 12:47 pm
by The Stig

Re: Pure Distilling Spirit Maker ????

PostPosted: Tue Mar 29, 2022 1:57 pm
by Whiskey Baron
Thanks for the reply Stig :text-thankyoublue:

Looks like I'm gonna be doing a bit of a shop come pay day this week :D :handgestures-thumbupleft: