Page 7 of 7

Re: Introducing The New FSD Blockhead

PostPosted: Fri Oct 17, 2014 11:57 pm
by woodduck
Urrazeb wrote:Let me know if ya need an offsider :romance-kisscheek: 8-} I'm interested to see the lemon wash


Yer he keeps teasing us with this lemon wash :laughing-rolling:

Mmmm you could use the lemon wash as you acid cleaning run aswell as your sac run, 2 birds 1stone :teasing-neener: :laughing-rolling: :laughing-rolling: :laughing-rolling:

Re: Introducing The New FSD Blockhead

PostPosted: Fri Oct 17, 2014 11:59 pm
by northernbrewer
Hey Mac

Do you happen to know off hand what the diameter of the stainless bolts holding the glass sections together are?

Minds a thinking about a glasser :D

Re: Introducing The New FSD Blockhead

PostPosted: Sat Oct 18, 2014 3:51 am
by BIG D
Cool looking glasser Mac. :handgestures-thumbupleft:

Re: Introducing The New FSD Blockhead

PostPosted: Sat Oct 18, 2014 11:54 am
by MacStill
northernbrewer wrote:Hey Mac

Do you happen to know off hand what the diameter of the stainless bolts holding the glass sections together are?

Minds a thinking about a glasser :D


The 4" tubes use 8mm rods & the 6" tubes use 10mm :-B

Re: Introducing The New FSD Blockhead

PostPosted: Sat Oct 18, 2014 1:14 pm
by viking
Looks good Mac

Re: Introducing The New FSD Blockhead

PostPosted: Sat Oct 18, 2014 3:30 pm
by 1 2many
Macstill wrote:So there ya's go...... glass blockhead with Mac custom hand built 6" inline thumper plate.


I have the same 6" plate in mine but can't see it run :crying-blue: That 6" glass module looks magic :music-deathmetal:

Would love to see it running :whistle:

The Blockhead Glasser can't beat that :clap: :clap: :handgestures-thumbupleft:

Re: Five Star Distilling, SS modular columns

PostPosted: Wed Jan 21, 2015 3:46 pm
by Hari
BackyardBrewer wrote:So is that a packed section on top of three plates with the reflux condenser at the top?

What's in the thumper/what's it do? I'd love a photo up the skirt so I could see what was going on.

It's all just so precise! My beloved bubbler is very organic in comparison. This is surgical blades compared to kitchen knives.

So slick.


Hi Mac,
I assume there is no reflux condensor on the top. A Harry cross flow type on top for reflux and a valve on the side arm would make a great VM still.

What do you reckon?
regards
Duncan

Re: Introducing The New FSD Blockhead

PostPosted: Wed Jan 21, 2015 3:58 pm
by MacStill
Hi Hari,

There is a reflux condenser just below the take off, all our bubblers are essentially CM ;-)