Page 1 of 1
neutralizer height.....
Posted:
Sat Aug 02, 2014 7:48 pm
by Redux
whats the height of a full spec neutralizer from the keg?
redux
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 8:04 pm
by TheMechwarrior
4"?
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 8:32 pm
by Sinerjee
TheMechwarrior wrote:4"?
4 inches seems awfully small for a full size neutralizer :shock:
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 8:37 pm
by TheMechwarrior
lolz
Does he want the height for a 4" or a 8" or some other sized rig?
I can only give you the 6" rig height. Got a feeling the 4" height is mentioned in the blockhead thread?
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 8:41 pm
by Redux
sorry lads... the height is for a 4 inch diameter rig.... standard setup.. no frills no odd ends....
the height im after is for a 4 inch neutralizer..... from the keg... to the top...the heighest point.... the crest.... apex etc......
cheers
redux
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 8:55 pm
by MacStill
I'm unable to verify at the moment, but 2130mm was the first thought I had.... :think:
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 9:01 pm
by MacStill
MacStill wrote:I'm unable to verify at the moment, but 2130mm was the first thought I had.... :think:
It's 1930 with a 2" boiler connection, minus 100mm for a short 4" boiler connection (recommended).
:handgestures-thumbupleft:
ps. my external drive with all this info isnt on me until monday.
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 9:03 pm
by BIG D
I'm 6ft if that helps
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 9:13 pm
by spit'n'shine
Fu@$ me! They are much taller than they look in pic by themselves!! :o
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 9:17 pm
by Redux
hmmm taller than i had in my head too..
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 9:34 pm
by BIG D
Think of it as wow factor 8-} I love it by the way that a 4"to2" reducer and a tall skinny keg.
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 9:38 pm
by Zak Griffin
Instead of the spacer/reducer above the RC and then the 180, you could run a blockhead type 180 and save yourself a fair bit of height :D
That, along with the shorter reducer (or a 4" still port on the keg), and you'd be laughing!
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 9:40 pm
by BIG D
Bigger is better isn't it? :text-lol: I guess it depends on how often you run it for neutral not that often for me so a day outside is nice as a 4 plater for my other brews inside to easy :handgestures-thumbupleft:
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 9:42 pm
by 1 2many
:text-+1: Yep my thoughts to Zak :handgestures-thumbupleft:
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 9:48 pm
by Leeroy
I have a 4" set up here that’s 1750mm from the boiler connection :handgestures-thumbupleft:
Re: neutralizer height.....
Posted:
Sat Aug 02, 2014 9:56 pm
by Redux
Leeroy wrote:I have a 4" set up here that’s 1750mm from the boiler connection :handgestures-thumbupleft:
thanks Leeroy...
ill be running in neutral mode mostly... so thts the height i need to work from...
cheers redux