Hi Guys,
I have a BrewPI Spark that controls my fermentation (FV) heating & cooling on my fermenters I use for making beer, the system has the ability to control a 12v pump that pumps glycol through an internal coil in my FV, once the temperature is reached the spark will turn off the pump, it can also turn on a heat pad to do the heating, it has a mechanism that stops both cool/heat being on at the same time, the system has the ability to control heating elements for mashing, boiling etc.
I reached out onto their forum & asked the question could the BrewPI spark be used in a distilling situation, the inventor of the sytem & another member have both commented that it should be possible & are looking for an ideal control scenario, then the inventor will look at putting a system into place to see if its a viable solution.
I hope I am allowed to post a link to the topic in question & would appreciate anyone who has some insight into getting the iddeal control scenario mapped out, a link to the brewPI system & one to the actual thread.
https://www.brewpi.com/introducing-brewpi-spark/
https://community.brewpi.com/t/distilli ... spark/4282
Thanks for any input