5 Star Store
Community Guidelines
Newbies Corner
Recipes
AD searchG'day guys
been trying to source from around the jug shops a few 2400w immersion heating elements, where the fuk do you get'm from ?? :? :?
( electronics is'nt my fort'e) :doh:
cheers
Stubs
Voltage Controller
Forum rules
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.
"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"
the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.
Regards,
aussiedistiller team.
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.
"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"
the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.
Regards,
aussiedistiller team.
Re: Voltage Controller
by stubbydrainer » Thu Dec 15, 2011 5:21 pm
- stubbydrainer
- Posts: 728
- Joined: Sun Aug 28, 2011 9:42 pm
- Location: Northern Rivers, NSW
- equipment: 4" perf. plate bubbler,2 1/2" pot with a triple wall liebig,
Small 8L pot for experiments & Gin, 6Kw 80ltr electric boiler , P.I.D/PWM controller
1/2 share with SBB in a 3" boka,
Re: Voltage Controller
by stubbydrainer » Thu Dec 15, 2011 7:53 pm
Thanks Maheel
these are 2200w , would they do in a 50 litre keg ?
thinking of a twin element set up, for a quik heat up, would they would do the job ? (faster is better :lol: :lol: )
the better 1/2 is getting on my case about the naked flame thing here ( thanks to SBB filling her pretty little head with worst case scenario's :x )
but I like the fast heat up that gas 747's offer :auto-layrubber:
I have a electronics whizz that lives up the road , he said if I get the elements he can do the rest with PID's (what ever that is :? :? )
cheers Stubs
these are 2200w , would they do in a 50 litre keg ?
thinking of a twin element set up, for a quik heat up, would they would do the job ? (faster is better :lol: :lol: )
the better 1/2 is getting on my case about the naked flame thing here ( thanks to SBB filling her pretty little head with worst case scenario's :x )
but I like the fast heat up that gas 747's offer :auto-layrubber:
I have a electronics whizz that lives up the road , he said if I get the elements he can do the rest with PID's (what ever that is :? :? )
cheers Stubs
- stubbydrainer
- Posts: 728
- Joined: Sun Aug 28, 2011 9:42 pm
- Location: Northern Rivers, NSW
- equipment: 4" perf. plate bubbler,2 1/2" pot with a triple wall liebig,
Small 8L pot for experiments & Gin, 6Kw 80ltr electric boiler , P.I.D/PWM controller
1/2 share with SBB in a 3" boka,
Re: Voltage Controller
by MacStill » Thu Dec 15, 2011 7:59 pm
2 x 2200w in a keg would be sweet :dance:
- MacStill
- Lifetime Member
- Posts: 16835
- Joined: Fri Mar 18, 2011 1:40 pm
- Location: Wide Bay QLD
- equipment: Anything I choose :P
Re: Voltage Controller
by stubbydrainer » Thu Dec 15, 2011 8:05 pm
It's got me thinkin Mac
2 elements, 4" flange, ss drain in bottom, ss tap out the side, fuck this is one mighty addictive hobby huh :doh:
Hold the bus ...... just found this
http://www.ebay.com.au/itm/WATER-HEATER ... 415c341477
2 elements, 4" flange, ss drain in bottom, ss tap out the side, fuck this is one mighty addictive hobby huh :doh:
Hold the bus ...... just found this
http://www.ebay.com.au/itm/WATER-HEATER ... 415c341477
- stubbydrainer
- Posts: 728
- Joined: Sun Aug 28, 2011 9:42 pm
- Location: Northern Rivers, NSW
- equipment: 4" perf. plate bubbler,2 1/2" pot with a triple wall liebig,
Small 8L pot for experiments & Gin, 6Kw 80ltr electric boiler , P.I.D/PWM controller
1/2 share with SBB in a 3" boka,
Re: Voltage Controller
by devotus » Thu Dec 15, 2011 8:29 pm
What's the postage to Australia on that element SD?
- devotus
- Posts: 222
- Joined: Thu Nov 03, 2011 10:48 pm
- equipment: copper alembic pot still
+
1.5 inch VM column
Re: Voltage Controller
by stubbydrainer » Thu Dec 15, 2011 8:43 pm
I don't know Devo
I reckon it's from Ukrane , It's probably dodgy :laughing-rolling: :laughing-rolling: :laughing-rolling:
edit: says.... $ 22.17
I reckon it's from Ukrane , It's probably dodgy :laughing-rolling: :laughing-rolling: :laughing-rolling:
edit: says.... $ 22.17
- stubbydrainer
- Posts: 728
- Joined: Sun Aug 28, 2011 9:42 pm
- Location: Northern Rivers, NSW
- equipment: 4" perf. plate bubbler,2 1/2" pot with a triple wall liebig,
Small 8L pot for experiments & Gin, 6Kw 80ltr electric boiler , P.I.D/PWM controller
1/2 share with SBB in a 3" boka,
Re: Voltage Controller
by devotus » Thu Dec 15, 2011 9:03 pm
funny that postage to Germany was also $22 and considering the Ukraine is only about 1500 kms away I find that a bit :crazy:
- devotus
- Posts: 222
- Joined: Thu Nov 03, 2011 10:48 pm
- equipment: copper alembic pot still
+
1.5 inch VM column
Re: Voltage Controller
by MacStill » Thu Dec 15, 2011 10:33 pm
maheel wrote:http://www.ebay.com.au/itm/HOT-WATER-ELEMENT-STAINLESS-STEEL-WATER-BOILER-3600W-/270822994638?pt=AU_HotWaterSystems&hash=item3f0e4ef2ce
:handgestures-thumbup:
- MacStill
- Lifetime Member
- Posts: 16835
- Joined: Fri Mar 18, 2011 1:40 pm
- Location: Wide Bay QLD
- equipment: Anything I choose :P
Re: Voltage Controller
by R-sole » Fri Dec 16, 2011 4:15 am
http://www.stokesap.com.au/
Stokes make the elements here in aus. You want the 2400 watt Incolloy screw in hot water element. If you have a look through their catalogue you''ll find it and then email em for your closest electrical wholesaler that deals with them.
http://www.stokesap.com.au/Downloads/St ... Sect_F.pdf
Best is the 825 sheathed element..2512bl. The 800 one is second best ... 1329bl
Last one i bought was a fair few years ago now, but around $50
Stokes make the elements here in aus. You want the 2400 watt Incolloy screw in hot water element. If you have a look through their catalogue you''ll find it and then email em for your closest electrical wholesaler that deals with them.
http://www.stokesap.com.au/Downloads/St ... Sect_F.pdf
Best is the 825 sheathed element..2512bl. The 800 one is second best ... 1329bl
Last one i bought was a fair few years ago now, but around $50
- R-sole
- Posts: 0
- Joined: Mon Apr 18, 2011 4:15 am
- Location: Northern NSW Australia
- equipment: Keg based pot stiller. 3" vm for occasionally making product for macerations and redistillation.
Re: Voltage Controller
by stubbydrainer » Fri Dec 16, 2011 9:58 am
Maheel
Not worried about amps cos I had a 30 amp outlet wired into shed for welder ( the welder is hard wired in at the on/off switch, but a 6-pack or 2 in the right place and a couple of plugs etc and problem solved) :D
Not worried about amps cos I had a 30 amp outlet wired into shed for welder ( the welder is hard wired in at the on/off switch, but a 6-pack or 2 in the right place and a couple of plugs etc and problem solved) :D
- stubbydrainer
- Posts: 728
- Joined: Sun Aug 28, 2011 9:42 pm
- Location: Northern Rivers, NSW
- equipment: 4" perf. plate bubbler,2 1/2" pot with a triple wall liebig,
Small 8L pot for experiments & Gin, 6Kw 80ltr electric boiler , P.I.D/PWM controller
1/2 share with SBB in a 3" boka,
Re: Voltage Controller
by stubbydrainer » Fri Dec 16, 2011 12:52 pm
stubbydrainer wrote:Maheel
Not worried about amps cos I had a 30 amp outlet wired into shed for welder :D
EDIT : I just checked it and it's 35 amp :doh:
- stubbydrainer
- Posts: 728
- Joined: Sun Aug 28, 2011 9:42 pm
- Location: Northern Rivers, NSW
- equipment: 4" perf. plate bubbler,2 1/2" pot with a triple wall liebig,
Small 8L pot for experiments & Gin, 6Kw 80ltr electric boiler , P.I.D/PWM controller
1/2 share with SBB in a 3" boka,
Re: Voltage Controller
by maheel » Fri Dec 16, 2011 5:02 pm
stubbydrainer wrote:stubbydrainer wrote:Maheel
Not worried about amps cos I had a 30 amp outlet wired into shed for welder :D
EDIT : I just checked it and it's 35 amp :doh:
bigger is better is it not ? or is it 3 phase or something ?
- maheel
Re: Voltage Controller
by stubbydrainer » Fri Dec 16, 2011 7:32 pm
Maheel
I know that philosofy ( I know, I should'a paid attn at school) :doh:
All I was meaning is that... current draw does not represent a problem, I assume that a 15 amp outlet would be a small problem in homes... is all ;)
I know that philosofy ( I know, I should'a paid attn at school) :doh:
All I was meaning is that... current draw does not represent a problem, I assume that a 15 amp outlet would be a small problem in homes... is all ;)
- stubbydrainer
- Posts: 728
- Joined: Sun Aug 28, 2011 9:42 pm
- Location: Northern Rivers, NSW
- equipment: 4" perf. plate bubbler,2 1/2" pot with a triple wall liebig,
Small 8L pot for experiments & Gin, 6Kw 80ltr electric boiler , P.I.D/PWM controller
1/2 share with SBB in a 3" boka,
Re: Voltage Controller
by stubbydrainer » Tue Jan 10, 2012 2:13 pm
5Star wrote:Best is the 825 sheathed element..2512bl. The 800 one is second best ... 1329bl
Last one i bought was a fair few years ago now, but around $50
Just got a price on the 2512BL they are now $144.44 inc gst + post, + a 2 week wait, cos they have to make them as they are no longer a stock item :(
- stubbydrainer
- Posts: 728
- Joined: Sun Aug 28, 2011 9:42 pm
- Location: Northern Rivers, NSW
- equipment: 4" perf. plate bubbler,2 1/2" pot with a triple wall liebig,
Small 8L pot for experiments & Gin, 6Kw 80ltr electric boiler , P.I.D/PWM controller
1/2 share with SBB in a 3" boka,
Re: Voltage Controller
by Cane Toad » Tue Jan 10, 2012 3:47 pm
Fuck it Stubbs,stick with the 747 :laughing-rolling: :laughing-rolling: Better still make another :laughing-rolling: :laughing-rolling: :laughing-rolling:
- Cane Toad
- Posts: 2473
- Joined: Thu Jul 28, 2011 9:14 pm
- Location: ask punkin
- equipment: where's my football :(
Re: Voltage Controller
by stubbydrainer » Tue Jan 10, 2012 5:04 pm
I wish I could BD,
but SBB unmeaningly :roll: ( good word that..I just made it up :geek: :laughing-rolling: ) has filled the better 1/2's head with worst case Alcohol & naked flame scenarios :angry-extinguishflame: , now she's going crazy :angry-screaming: and her head is full of shed fires, explosions, insurance issues, hospital & doctors bills from me being burn't to a crisp :auto-ambulance: etc.
So to keep the peace I have to :angry-tappingfoot: build an electric boiler ,
so I am going to make a fukin doosey coz I will never get the opportunity again :dance: :dance:
but SBB unmeaningly :roll: ( good word that..I just made it up :geek: :laughing-rolling: ) has filled the better 1/2's head with worst case Alcohol & naked flame scenarios :angry-extinguishflame: , now she's going crazy :angry-screaming: and her head is full of shed fires, explosions, insurance issues, hospital & doctors bills from me being burn't to a crisp :auto-ambulance: etc.
So to keep the peace I have to :angry-tappingfoot: build an electric boiler ,
so I am going to make a fukin doosey coz I will never get the opportunity again :dance: :dance:
- stubbydrainer
- Posts: 728
- Joined: Sun Aug 28, 2011 9:42 pm
- Location: Northern Rivers, NSW
- equipment: 4" perf. plate bubbler,2 1/2" pot with a triple wall liebig,
Small 8L pot for experiments & Gin, 6Kw 80ltr electric boiler , P.I.D/PWM controller
1/2 share with SBB in a 3" boka,
Re: Voltage Controller
by SBB » Tue Jan 10, 2012 5:43 pm
Geeeeeeze all I said was "Id keep the output a bit further from the flames"..........
I think the truth of it is that the BD 747 demonstration you gave her that day might have caused most of the feelings of fear and concern. :laughing-rolling: :laughing-rolling:
I think the truth of it is that the BD 747 demonstration you gave her that day might have caused most of the feelings of fear and concern. :laughing-rolling: :laughing-rolling:
- SBB
- Lifetime Member
- Posts: 2451
- Joined: Mon Mar 21, 2011 8:12 pm
- Location: Northern NSW
- equipment: (The Pelican) a 2 inch pot / stripper on 25L electric boiler interchangable with T500 reflux still...... 2 1/2 inch pot still on 50L keg (gas burner).....
3 inch Boka (half share with Draino),...... 4 inch 4 plate perforated plate Bubbler
Re: Voltage Controller
by stubbydrainer » Tue Jan 10, 2012 5:48 pm
yep , paranoid, that's it Paranoid to the MAX :laughing-rolling:
But in this case, its done me a favour :dance: :dance:
But in this case, its done me a favour :dance: :dance:
- stubbydrainer
- Posts: 728
- Joined: Sun Aug 28, 2011 9:42 pm
- Location: Northern Rivers, NSW
- equipment: 4" perf. plate bubbler,2 1/2" pot with a triple wall liebig,
Small 8L pot for experiments & Gin, 6Kw 80ltr electric boiler , P.I.D/PWM controller
1/2 share with SBB in a 3" boka,
Who is online
Users browsing this forum: No registered users and 27 guests