Aussiedistiller, Home Distilling, Moonshine, Home Brew

Posted: **Sat Apr 18, 2015 10:28 pm**

Well.. this could be Pandora's box... but what has worked and what has failed..

This is a place where you!!! who have built a controller have had multiple runs (10+) can say whether you're setup works or not,with a list of components. .

I must stress no slander or technical jargen. And built by a confident person. No back yard shell be right jobs.

Posted: **Sat Apr 18, 2015 10:36 pm**

rumdidlydum wrote:
rumdidlydum wrote:Bring on the spirit runs :happy-partydance:
All tested and earth leakage tested.. :handgestures-thumbupleft:
1x pc fan
1x nokia charger
1x 3600w speed controller
1x volt/amp display
1x 16amp circuit breaker
+ 2 oak barrels
+ minimum 3 months

= mmmm rum

update
don't get the speed controller or the lcd screen.
Multiple failures with components.
But the fan and box is good. :teasing-tease:

Posted: **Sat Apr 18, 2015 11:42 pm**

I've built one of punchies controller from the electrical section on this forum and it's done about 50 runs with no problems :handgestures-thumbupleft:
I used the parts on his diagram,all purchased from rs online and got a sparky to test it and all works fine
:music-deathmetal:

Aussiedistiller, Home Distilling, Moonshine, Home Brew

controller, tested worked/failed

controller, tested worked/failed

Re: controller, tested worked/failed

Re: controller, tested worked/failed