Page 1 of 1

Heating Element for keg boiler

PostPosted: Thu May 19, 2016 2:28 pm
by Speedmaster71
Well my Keg King 2200 Watt brew heater decided to go bang! From what I've read it's not that uncommon but I'm finding it hard to find any alternatives that are already wired and that fit into the same 32mm hole. I'm after something that heats up a bit quicker too.. maybe 4500 watts?
Any suggestions would be appreciated....
Cheers :handgestures-thumbupleft:

Re: Heating Element for keg boiler

PostPosted: Thu May 19, 2016 2:29 pm
by jacobraven
Cant really go over 2400w unless youve got a powerpoint designed for it,

Re: Heating Element for keg boiler

PostPosted: Thu May 19, 2016 2:52 pm
by Doubleuj
the fsd ones are brilliant and only need basic wiring up, not condoning it but its easy as piss to wire it up yourself, and as stated 2400 is the highest you can go on a 10amp circuit( 10 amp is the normal house socket rating), if you had a 15amp circuit you could run a 3600 watt. unit

Re: Heating Element for keg boiler

PostPosted: Thu May 19, 2016 3:26 pm
by Speedmaster71
Doubleuj wrote:the fsd ones are brilliant and only need basic wiring up, not condoning it but its easy as piss to wire it up yourself, and as stated 2400 is the highest you can go on a 10amp circuit( 10 amp is the normal house socket rating), if you had a 15amp circuit you could run a 3600 watt. unit


Can't find anything on the FSD website

Re: Heating Element for keg boiler

PostPosted: Thu May 19, 2016 3:40 pm
by wiifm
Speedmaster71 wrote:
Doubleuj wrote:the fsd ones are brilliant and only need basic wiring up, not condoning it but its easy as piss to wire it up yourself, and as stated 2400 is the highest you can go on a 10amp circuit( 10 amp is the normal house socket rating), if you had a 15amp circuit you could run a 3600 watt. unit


Can't find anything on the FSD website


http://www.5stardistilling.net/boiler-accessories/ :-B

Re: Heating Element for keg boiler

PostPosted: Thu May 19, 2016 5:26 pm
by WTDist
wiifm wrote:
Speedmaster71 wrote:
Doubleuj wrote:the fsd ones are brilliant and only need basic wiring up, not condoning it but its easy as piss to wire it up yourself, and as stated 2400 is the highest you can go on a 10amp circuit( 10 amp is the normal house socket rating), if you had a 15amp circuit you could run a 3600 watt. unit


Can't find anything on the FSD website


http://www.5stardistilling.net/boiler-accessories/ :-B

:laughing-rolling: :laughing-rolling: :laughing-rolling:

Oh man if i had a dollar for every time i looked on their website i would have enough to buy their stills :))

Re: Heating Element for keg boiler

PostPosted: Thu May 19, 2016 6:21 pm
by Doubleuj
WTDist wrote:
wiifm wrote:
Speedmaster71 wrote:
Doubleuj wrote:the fsd ones are brilliant and only need basic wiring up, not condoning it but its easy as piss to wire it up yourself, and as stated 2400 is the highest you can go on a 10amp circuit( 10 amp is the normal house socket rating), if you had a 15amp circuit you could run a 3600 watt. unit


Can't find anything on the FSD website


http://www.5stardistilling.net/boiler-accessories/ :-B

:laughing-rolling: :laughing-rolling: :laughing-rolling:

Oh man if i had a dollar for every time i looked on their website i would have enough to buy their stills :))

:laughing-rolling: FSD, where dreams, and puddles of drool are made