Plumby wrote:If that's a still spirits boiler you are using they are only 1380 watt elements not 2400 have you replaced the element?
Nop e.not replaced , just had 2400 in my head for some reason dunno why . So I'm using an 1380w element :oops:
Plumby wrote:If that's a still spirits boiler you are using they are only 1380 watt elements not 2400 have you replaced the element?
warramungas wrote:Mate. You've gone to all this trouble, why not go the whole hog and build a boka or Nixon stone still?
And is your pipe 50 or 54 mm outside diameter? (looks 50).
Plumby wrote: If it is the 1380 watt element, will there be enough power there to push the vapour all the way up 1 meted plus of pipe then through the condenser's?
prawnz wrote:Plumby wrote: If it is the 1380 watt element, will there be enough power there to push the vapour all the way up 1 meted plus of pipe then through the condenser's?
Yup , my question exactly :handgestures-thumbupleft:
Its the standard one , single coil in a 25lt boiler . its been working just fine with the standard still head on , heats up from cold in about 60 to 75 mins .
warramungas wrote:Another question is how you're going to pack it and with what if you solder reducers on each end.
warramungas wrote: I hope the 1/2" doesn't cause any problems.
Users browsing this forum: No registered users and 78 guests