Is this reflux still better than the t500??

Reflux still design and discussion

Is this reflux still better than the t500??

Postby Coolabah » Tue Jul 03, 2018 9:59 am

The photo is of the pure distilling still is it better and do I require to mess with the water flow
You do not have the required permissions to view the files attached to this post.
Coolabah
 
Posts: 1
Joined: Tue Jun 19, 2018 11:10 am
equipment: Nothing useful

Re: Is this reflux still better than the t500??

Postby PeterC » Tue Jul 03, 2018 10:58 am

This still is liquid managed so no fiddling with water flow. You fiddle with liquid take off instead. I had something like this in the past and you will find the liquid comes off too hot so you need to cool it. I used a small Liebig condenser and routed the cooling water through that first. The packed section is very short and you will need to restrict take off to get anything decent. This like the T500 is to make neutrals only, and mine with cuts was still too smeared to get something good enough for my taste. You could remove the packing for stripping. For less money you could buy a keg boiler and two inch pot still parts, This is what I did next and double distilled on FFV recipe. This made a better product for me. Learning to run the still and cuts were the critical parts to be successful.
Cheers
PeterC
 
Posts: 188
Joined: Sun Feb 05, 2017 12:20 am
Location: Perth WA
equipment: An 18gall. (80L) keg boiler. A 50L Keg boiler. A 4 plate, 4 inch glass column, 500mm packed section Carter head. A 1.8L all copper micro still for small batches of Gin. Plus other bits.

Re: Is this reflux still better than the t500??

Postby dans.brew » Tue Jul 03, 2018 12:44 pm

:text-+1:
I also have one... its what i started with. Some of the stuff in the kit i have never used and prob never will. For the same sort of money you could make a pretty good pot still that could one day be upgraded to a bubbler, if you have a few skills and hunt around the scrappies for a few parts.
It depends a bit if your just keen on making neutral or want to branch out to other thing ie whiskies, rums ect
dans.brew
 
Posts: 837
Joined: Fri Oct 07, 2016 10:26 pm
Location: Victoria- Northern Wimmera
equipment: Pure Distilling Reflux Still
2" Pot Still with lieberg
4" x 4 plates Bubbler with 2"bubble caps on 50ltr keg boiler

Re: Is this reflux still better than the t500??

Postby warramungas » Wed Jul 04, 2018 12:13 am

Better than a t500 still? Hard to get much worse.
Scratch that. There are worse then t500 heads out there.
I went with a brewcraft(???) brand boiler as it was same price as a t500 but held 5 liters more.
I
found that size boiler is good for starting out but once you cut your teeth you'll eventually want a bigger one. Be fine for that still though.
warramungas
 
Posts: 1403
Joined: Sun Oct 18, 2015 9:38 pm
Location: Nor Perth
equipment: 180 litre fermenter x 2
30 liter boiler
PDA-1
2" four plate modular bubbler
2" one meter long LM column
110 liter boiler with 25 liter (max) inline thumper
4" x 4 plate bubble cap still

Re: Is this reflux still better than the t500??

Postby Dig Brinker » Thu Jul 05, 2018 2:06 am

The quality & size are similar, ie both average. If you’re wanting to make bourbon and other stuff you’re better off looking at a bubbler, with packed section added for neutral.
Dig Brinker
 
Posts: 552
Joined: Sun Dec 20, 2015 5:46 am
Location: South of Melbourne
equipment: 4 inch 4 plate bubbler on keg boiler

Re: Is this reflux still better than the t500??

Postby Boomgate » Tue Jan 15, 2019 3:11 pm

I have had mine for years, great learners reflux still... Easier to operate than a t500 from what i understand... well... Just look down the posts on this page, so many questions about the t500, and none that I can see about this still..
Last edited by Boomgate on Tue Jan 15, 2019 3:12 pm, edited 1 time in total.
Boomgate
 
Posts: 466
Joined: Mon Oct 08, 2012 8:56 pm
Location: Western Melbourne, VIC
equipment: 25L Ultra Pure Reflux.

Re: Is this reflux still better than the t500??

Postby Rolls912 » Tue Jan 15, 2019 3:15 pm

One of the biggest issues I had with urn boilers is that it burns the sediment. Make sure the wash is super clean before you add it to the boiler.
Rolls912
 
Posts: 204
Joined: Tue Feb 14, 2017 10:16 pm
equipment: 5SD 4inch Boka
5SD pot still
5SD milk can
Carter head
Charcoal filter
Temp controller


Return to Reflux Stills



Who is online

Users browsing this forum: No registered users and 2 guests

x