Just thought I’d share my 3” reduced bokka build that I’ve finally got round to doing :handgestures-thumbupleft:
I will make a VM head for it in the future, but this should make me some nice vodka and give me some light rum with all my rum feints . She’s got about 1700 mm of packed section with 5star copper mesh. Vented at the top and brass fittings tinned and also set up so copper pipe pulls up hard into the staino needle valve and should not come into contact with the brass fittings any way. Still have to insulate the column and boiler and put in a 4” glass fill port, element ports and drain .Condenser has a 1” cold finger and a double 3/8” coil at 260 mm long which should to the job and deflector to stop reflux liquid from going straight down the centre and missing the collection cup.