Page 1 of 1
Billy Bob Boka
Posted:
Wed Jul 31, 2019 8:23 pm
by Jono
Hey peeps,
Tried to upload some pics but it's pretty clunky so I've made a link to a (removed link by admin)
Cheers,
J.
Re: Billy Bob Boka
Posted:
Thu Aug 01, 2019 8:53 am
by Sam.
What’s the site glass for?
Also not the best idea to link to things with your actual name on it....
Re: Billy Bob Boka
Posted:
Thu Aug 01, 2019 9:12 am
by MaKa
The Google photos location also has the location the photo was taken too.
Re: Billy Bob Boka
Posted:
Fri Aug 02, 2019 8:02 am
by Jono
Thanks for the tip guys. I'm a dingus for not thinking of that... Any idea how to edit the post?
I'm putting a sight glass below the RC so I can see the magic happen.
Re: Billy Bob Boka
Posted:
Fri Aug 02, 2019 9:17 am
by Sam.
I removed your link mate just put up pics through the forum :handgestures-thumbupleft:
Re: Billy Bob Boka
Posted:
Fri Aug 02, 2019 9:54 pm
by Jono
Finally managed to get some pics up after getting logged out a few times. Soooo frustrating. :angry-banghead:
Re: Billy Bob Boka
Posted:
Fri Aug 02, 2019 9:59 pm
by Jono
Some more pics
Re: Billy Bob Boka
Posted:
Fri Aug 02, 2019 10:02 pm
by Jono
Being a fridgy I wanted it perfect but struggled using Mapp gas as I couldn't get access to an oxy. Oh well it doesn't look as pretty.
Re: Billy Bob Boka
Posted:
Fri Aug 02, 2019 10:02 pm
by bluc
Sweet how long is packed section?
Are you.really.a fridge? :teasing-tease:
Re: Billy Bob Boka
Posted:
Fri Aug 02, 2019 10:10 pm
by Jono
Haha. Just saw that... It's 1.5m which was straight off home distiller recommendation...
Re: Billy Bob Boka
Posted:
Fri Aug 02, 2019 10:16 pm
by Jono
Have done several birdwatchers and people can't tell that it's home made Voddy! I'm dang stoked.
Now to make a pot still for some gin and whisky... Recommendations for designs please...
Re: Billy Bob Boka
Posted:
Fri Aug 02, 2019 10:55 pm
by bluc
:laughing-rolling: pelican pot is a good design :handgestures-thumbupleft:
Re: Billy Bob Boka
Posted:
Sat Aug 03, 2019 12:53 am
by Jono
Thanks bluc
Re: Billy Bob Boka
Posted:
Tue Aug 06, 2019 7:55 am
by woodduck
Nice job mate, looks the goods :handgestures-thumbupleft:
The boka does make great neutral, slow but great :))
You have a pot still right there. Remove the packing and run it with the output tap completely open. Strip it flat out then use a power controller to slow it down for a spirit run.
Good luck mate.
Re: Billy Bob Boka
Posted:
Tue Aug 06, 2019 8:19 pm
by Jono
Thanks woodduck! Does it matter about column height using it as a pot? Or could I just put the condenser head straight on the keg?
Cheers,
J
Re: Billy Bob Boka
Posted:
Wed Aug 07, 2019 4:59 am
by scythe
Heat is not a massive concern with a pot still.
You might want a bit of height to allow you some time to stop a puke before if spurts out the condensor.
300mm or so?
I would definitely have the glass section at the keg, then an extension and finally out to the PC.
Or set it up as a hybrid pot still.