Page 2 of 6
Re: Custom LM build
Posted:
Wed Oct 30, 2019 5:00 pm
by Jezza93
I don't think I will need mesh as there 10mm gap between coils and 310mm long if vapour gets pass it I running way to hard I was going to use a little bit of mesh at the top to help locate it tho :-D :handgestures-thumbupleft:
Re: Custom LM build
Posted:
Sat Nov 02, 2019 6:20 pm
by Jezza93
Finished the condenser holding pipe with tri clamp mounts :handgestures-thumbupleft:
Re: Custom LM build
Posted:
Sat Nov 02, 2019 6:42 pm
by bluc
Very nice :handgestures-thumbupleft:
Re: Custom LM build
Posted:
Sat Nov 02, 2019 8:46 pm
by Jezza93
Thanks mate made the rings and pipe for it from pipe and plate :music-deathmetal:
Re: Custom LM build
Posted:
Sun Nov 03, 2019 7:30 pm
by Jezza93
Thermo well for vapour temp probe made a bit of a cover to stop the refluxing liquid fluxuating the temperature, it's upside down in the photo just to see the probe in there
Also got my two kegs and starting to making a sub boiler :handgestures-thumbupleft:
Re: Custom LM build
Posted:
Tue Nov 05, 2019 5:37 am
by Jezza93
My new fermenter up and running :D bubbling away nicely
Re: Custom LM build
Posted:
Wed Nov 06, 2019 3:54 pm
by Jezza93
All back from getting hydroblasted looks so good :happy-partydance: :music-deathmetal: :D
Re: Custom LM build
Posted:
Thu Nov 07, 2019 10:10 pm
by Jezza93
Got the sump, kegs and drain preped also putting a 6 inch sight glass just below the collum output to keep and eye on the wash
Got a S/S junction box with lights and fittings for my element :happy-partydance:
Re: Custom LM build
Posted:
Thu Nov 07, 2019 10:19 pm
by bluc
Whats hydroblasting?
Re: Custom LM build
Posted:
Fri Nov 08, 2019 5:58 am
by Jezza93
Is like a dustless blaster but polishes
Here's a link to website
https://www.vaporblastingequipment.com/ ... ng-processDoes a really good job had a mate that has a machine at home :handgestures-thumbupleft:
Re: Custom LM build
Posted:
Mon Nov 11, 2019 9:51 pm
by Jezza93
The Start of my boiler coming together lot of work to get everything to fit right :handgestures-thumbupleft:
Re: Custom LM build
Posted:
Tue Nov 12, 2019 6:05 am
by woodduck
Nice one. Looking good :handgestures-thumbupleft:
Re: Custom LM build
Posted:
Tue Nov 12, 2019 9:36 pm
by Jezza93
6 inch sight glass just need to drill and tap holes for the countersunk bolts
Re: Custom LM build
Posted:
Thu Nov 14, 2019 10:26 pm
by Jezza93
Finished the sight glass had to drill and tap countersunk bolts and make a blue silicone gasket and weld pipe with a fish mouth :smile: :handgestures-thumbupleft:
Re: Custom LM build
Posted:
Thu Nov 14, 2019 10:31 pm
by Jezza93
Mock up of my elements and junction box in my sump, should work well :handgestures-thumbupleft: p.s that little cardboard box is to hold the element it's not staying there
Re: Custom LM build
Posted:
Thu Nov 14, 2019 10:34 pm
by Jezza93
Just a size comparison from what I have to what I am going to :D :handgestures-thumbupleft: :music-deathmetal:
Re: Custom LM build
Posted:
Fri Nov 15, 2019 8:18 am
by db1979
Looking good :happy-partydance:
Re: Custom LM build
Posted:
Tue Nov 19, 2019 9:54 pm
by Jezza93
So I decided to make a 4 inch fill port for my boiler that I will have off to the side so I can fill and assemble my collum at the same time :handgestures-thumbupleft:
Re: Custom LM build
Posted:
Wed Nov 20, 2019 1:49 pm
by bluc
this is going to be a beast condenser is bigger then whole previous still :laughing-rolling:
Re: Custom LM build
Posted:
Thu Nov 21, 2019 8:38 am
by scythe
How tall are you making the column for the new still?