Hello wise ones
I am running my 2"" boka but after 45 minutes of reflux when I open the valve - no drips at all.
Happened yesterday and again today.
Copper mesh has been taken out and put back.
Outlet valve and copper tube has been checked for obstructions etc. Water poured in flows out again through the copper tube so that bit is not the problem.
Still has been taken apart and reassembled.
Running 40% TPW low wines.
Water supply is submersible pump in swimming pool - working fine, exit water is the same as previous runs in terms of volume and temperature.
The only difference between this and my previous ( successful) runs is that the boiler was a bit fuller. To about 2 cm below max line (25 litre boiler).
This morning I added a stainless steel steamer with some broken crockery and that has quietened the boil down so it is not as noisy - but has not made a difference to the output..
So I am assuming that this must have something to do with how full the boiler is. When it cools down enough I will remove some of the low wines and try again. Any other ideas as to what is going on?
Thanks for your help.
Carol.