RC Al wrote:That's around the abv that my 3 plates put out.
The flavour will depend on how much reflux your using to get there.
Grab a blanket for your boiler, your heat up times are mind numbing lols
Hick1960 wrote:Finally managed to get the salt out of my first coil. Had to cheat. I drilled a 4mm hole at the bottom of the coil right in the middle of the outer and inner coils. The outside coil cleared quickly blowing out of the hole but the inside still sat for about 3 days under constant water pressure and boiling in my boiler. Eventually it gave way. I then just cut a small copper patch and soldered over the hole. Hooked up a hose and timed the flow. Exactly the same as the second coil that was filled with water but flattened a bit. Both 4.5 litres a minute. So I now have a spare coil.
RC Al wrote:Hey mate, Just for S&G's could you try the same water source through a straight piece of pipe? :-B
Users browsing this forum: No registered users and 50 guests