Aussiedistiller, Home Distilling, Moonshine, Home Brew

I've got a 6 kW immersion heater that I've been planning to use in a 100 l vessel, and build a shootgun stripper to that, does anybody know what dimensions I should use, I was planning of making the vessel and shootgun in stainless, and the pipes in the shootgun should be 12 mm copper (which I can "borrow" from my job).

Anyone got any suggestions

/Henrik from Sweden

I suggest you build it big and post lots of pics!

Don't forget to research you eletrical capacity in the wiring of your house. At 240v that's 25 amps. A lot of current.