Page 1 of 1
Still parts
![Post Post](./styles/proFormell/imageset/icon_post_target.gif)
Posted:
Sun Mar 20, 2011 3:36 pm
by Kimbo
Hi, can anyone tell me where i can get a 3/8 needle valve in Perth?
Re: Still parts
![Post Post](./styles/proFormell/imageset/icon_post_target.gif)
Posted:
Sun Mar 20, 2011 3:50 pm
by MacStill
Hi Kimbo,
I've got a few SS 3/8 needle valves here mate, they are top quality and not cheap shit however.
$80.00 plus postage.
Or you can get crappy cheap brass ones from any hydraulic shop for about 35 to 40 bucks, that will work ok, try ENZED for starters.
Also I was cleaning up my shed and found a spare 3" double reducer collection chamber I made at my last house, it's got the pot still mod done to it too, temp port, centering ring and 3/8 take off, it's a bit dirty but would clean up real nice with a file and steel wool... let me know if your interested and we'll work something out.
Cheers.
Re: Still parts
![Post Post](./styles/proFormell/imageset/icon_post_target.gif)
Posted:
Sun Mar 20, 2011 4:14 pm
by Kimbo
Cheers Mate, i'll keep that in mind.
Re: Still parts
![Post Post](./styles/proFormell/imageset/icon_post_target.gif)
Posted:
Mon Mar 21, 2011 3:45 pm
by MacStill
kimbo wrote:Cheers Mate, i'll keep that in mind.
No worries mate,
I just found a spare coil condenser for a 3" head too, it's a double helix roughly 10" long, let me know if you need one, if not I might advertise it elsewhere.
Cheers.
Re: Still parts
![Post Post](./styles/proFormell/imageset/icon_post_target.gif)
Posted:
Tue Jul 15, 2014 7:45 pm
by Geeps
Kimbo wrote:Hi, can anyone tell me where i can get a 3/8 needle valve in Perth?
MacStill wrote:Hi Kimbo,
I've got a few SS 3/8 needle valves here mate, they are top quality and not cheap shit however.
$80.00 plus postage.
Or you can get crappy cheap brass ones from any hydraulic shop for about 35 to 40 bucks, that will work ok, try ENZED for starters.
Also I was cleaning up my shed and found a spare 3" double reducer collection chamber I made at my last house, it's got the pot still mod done to it too, temp port, centering ring and 3/8 take off, it's a bit dirty but would clean up real nice with a file and steel wool... let me know if your interested and we'll work something out.
Cheers.
MacStill wrote:kimbo wrote:Cheers Mate, i'll keep that in mind.
No worries mate,
I just found a spare coil condenser for a 3" head too, it's a double helix roughly 10" long, let me know if you need one, if not I might advertise it elsewhere.
Cheers.
Are and the FSD legend begins :)) :))
Re: Still parts
![Post Post](./styles/proFormell/imageset/icon_post_target.gif)
Posted:
Wed Jul 16, 2014 10:15 am
by Kimbo
Geez......that was a long time ago..... :handgestures-thumbupleft:
Re: Still parts
![Post Post](./styles/proFormell/imageset/icon_post_target.gif)
Posted:
Wed Jul 16, 2014 10:16 am
by MacStill
yeah I think we had 2 members back then :))
Re: Still parts
![Post Post](./styles/proFormell/imageset/icon_post_target.gif)
Posted:
Wed Jul 16, 2014 10:20 am
by Kimbo
Yer...i recon yer probably right :handgestures-thumbupleft: