Page 1 of 1

Cavemans 3" bok

PostPosted: Fri Jul 27, 2012 12:58 pm
by MacStill
Doing a low wines run borrowing Cavey's bok I built a while back, poor bugger due to work commitments hasnt been able to run it yet :snooty:

Anyway I thought I'd give it test run (it's had cleaning runs done) and keep some notes for him on how it performs, and also share the results with him tonight at my joint for a piss up. :))

Here tis heating up, got 4400w going through two separate circuits :dance:

P7272110.jpg


note the controller with neon blue lights :laughing-rolling:

Re: Cavemans 3" bok

PostPosted: Fri Jul 27, 2012 1:28 pm
by stilly_bugger
Is this the T-in-a-plate type, like MR-E's charity auction build?

I'd be interested in your opinion about any differences between this design and the Double Reducer Bok.

I'm guessing the T-in-a-plate is cheaper to build. What about performance? Any differences?

Cheers.

Re: Cavemans 3" bok

PostPosted: Fri Jul 27, 2012 1:40 pm
by googe
Looks good mate, good luck with it, hope it works good for you. Happy drinking tonight :mrgreen:

Re: Cavemans 3" bok

PostPosted: Fri Jul 27, 2012 1:57 pm
by MR-E
stilly_bugger wrote:Is this the T-in-a-plate type, like MR-E's charity auction build?

I'd be interested in your opinion about any differences between this design and the Double Reducer Bok.

I'm guessing the T-in-a-plate is cheaper to build. What about performance? Any differences?

Cheers.


Depends on the driver, McStill's also got plenty of heat & control with his flash controller.

Re: Cavemans 3" bok

PostPosted: Fri Jul 27, 2012 1:58 pm
by MacStill
MR-E wrote:
stilly_bugger wrote:Is this the T-in-a-plate type, like MR-E's charity auction build?

I'd be interested in your opinion about any differences between this design and the Double Reducer Bok.

I'm guessing the T-in-a-plate is cheaper to build. What about performance? Any differences?

Cheers.


Depends on the driver, McStill's also got plenty of heat & control with his flash controller.


Add to that just a teeny little bit of experience :text-lol:

Re: Cavemans 3" bok

PostPosted: Fri Jul 27, 2012 2:34 pm
by MR-E
McStill, to avoid flooding I used a 1" tee on my 3" build, what size is your throat section on this build. :?:

Re: Cavemans 3" bok

PostPosted: Fri Jul 27, 2012 2:47 pm
by MacStill
MR-E wrote:McStill, to avoid flooding I used a 1" tee on my 3" build, what size is your throat section on this build. :?:


This one has a 1.5" opening on the internal reducer, it's not a standard bok but I'll bet it's been :obscene-tolietpush: thought :obscene-tolietpush: of before :teasing-tease:

Re: Cavemans 3" bok

PostPosted: Fri Jul 27, 2012 2:48 pm
by MacStill
Currently collecting @ 3.5 L/PH

I'll step it up soon

Re: Cavemans 3" bok

PostPosted: Fri Jul 27, 2012 3:36 pm
by caveman
Nice work Mac keep up the good work I'll be round tonite for sampling :D

Re: Cavemans 3" bok

PostPosted: Fri Jul 27, 2012 3:52 pm
by MacStill
I've already started the party :))

P7272111.jpg

Re: Cavemans 3" bok

PostPosted: Fri Jul 27, 2012 7:19 pm
by MacStill
all done, pulled 11.5 liters @ 3.5l/ph for 95.2% ABV :dance: :dance: :dance:

Re: Cavemans 3" bok

PostPosted: Fri Jul 27, 2012 7:27 pm
by MR-E
McStill wrote:all done, pulled 11.5 liters @ 3.5l/ph for 95.2% ABV :dance: :dance: :dance:


Nice :handgestures-thumbupleft: