Still building my 2inch boka.

[minimalist_1]

So I'm still building my boka, got all the needle valves, compression fittings, pipe. Have completed my double coil condensor and soft soldered to the end caps. Taking a little longer than usual with 2 ankle biters around and the wife nagging me whenever I even look at the shed. She's really going to love it when I start restoring the car!

Anyway had a very important question to ask though. What is a good length for the column. Currently its about 1.5m on a 30litre pommy keg. And also considering using Scoria or ceramic packing, where should the packing start and finish in the column.

Sent from my HTC One X using Tapatalk 2

[Kimbo]

That is a good length mate, as for the packing, fillerup :D
from the bottom of your column to about 20 or 30mm below your take off area. :handgestures-thumbupleft:

[minimalist_1]

Cheers kimbo.

Sent from my HTC One X using Tapatalk 2