Hi all. Finally starting out on my build now parts are starting to arrive.
Going with a Boka/Vm combo, in 54mm pipe and around 1.2m tall column, I say that as I have 2m to use for both boiler connection and the Boka head etc, so may be taller of shorter. Going to sit on top of a 20ltr boiler and thinking of running 12.5 ltr at a time so a wash will be 2 runs. Yes I know you'll all say it's too small, but I want to start out this way, then If the bug bites then I can build a bigger boiler for the column or most likely a completly new still.
Column will be split in 2 sections and centering rings and a removable head, that I then can run the boiler as a full Pot still with a pot still head.
I'm no good with fancy diagrams so you'll just get pictures of the build as it happens.
This is the Boka head Samohon from HD has drawn which is what I'm going off
My boiler vessel, it's an insulated tun, with a 2750w element in it, will be building a controller for it also
Got to love shiny
Made a start on the slant plates, must say the templates on HD work an absolute treat, took all the maths out of it!
Thats me so far, waiting for pay day so I can order my copper fittings.
Nick