5 Star Store
Community Guidelines
Newbies Corner
Recipes
AD searchNice job mate :handgestures-thumbupleft:
I've been wanting to try stainless to copper what solder/ flux do you use?
WTDist T500 Modification
Re: WTDist T500 Modification
by Doubleuj » Wed Nov 04, 2015 6:54 pm
- Doubleuj
- Lifetime Member
- Posts: 3630
- Joined: Fri Jan 16, 2015 7:15 pm
- Location: rockhampton qld
- equipment: 4" stainless glasser
Re: WTDist T500 Modification
by WTDist » Wed Nov 04, 2015 7:59 pm
https://www.masters.com.au/product/900001096/cigweld-965-soldering-flux-125ml
bout 6 bux and does copper to copper too. i water down to about 1 part flux 2 parts water for copper and works a treat. straight flux for copper to stainless or ss to ss :handgestures-thumbupleft:
bout 6 bux and does copper to copper too. i water down to about 1 part flux 2 parts water for copper and works a treat. straight flux for copper to stainless or ss to ss :handgestures-thumbupleft:
- WTDist
- Posts: 2
- Joined: Sun Oct 05, 2014 11:32 am
- Location: Brisbane
- equipment: Building a 4" bubbler with 8" glass thumper
Re: WTDist T500 Modification
by Doubleuj » Wed Nov 04, 2015 8:21 pm
Cheers, I'll try my bakers first, if I don't spill it all, and if that doesn't work then it's good to know the cig weld does :handgestures-thumbupleft: what about solder?
- Doubleuj
- Lifetime Member
- Posts: 3630
- Joined: Fri Jan 16, 2015 7:15 pm
- Location: rockhampton qld
- equipment: 4" stainless glasser
Re: WTDist T500 Modification
by WTDist » Wed Nov 04, 2015 9:26 pm
The bunnings aqua safe solder sticks are what i used
- WTDist
- Posts: 2
- Joined: Sun Oct 05, 2014 11:32 am
- Location: Brisbane
- equipment: Building a 4" bubbler with 8" glass thumper
Who is online
Users browsing this forum: No registered users and 5 guests