3 Inch colum to 2 inch boka head

[jaco72]

I have a 2 inch boka that produces very good product. It has a removable packed section 1200 long and out let product size is 1/4 inch.
My question is.
Could I replace the middle section with a 3 inch and reducer to 2 inch existing boka head I have.

[rumdidlydum]

I say yes you can :D :teasing-tease: What are you trying to achieve? :handgestures-thumbupleft:

[benpandaae86]

I think you would need a larger take off tube as 1/4 will be too small i have a 1/2 on my 3 inch boka

[jaco72]

With good cuts I make a good nuetrals spirit that I then wood chip etc.
The 1/4 inch pipe and 1/4 needle valve I currently run on stripping at 1.5 ltr per hour and on spirit run about 700 ml per hour so as to have plenty reflux. Dripping at a rate just before street kicks in.