T500 Assembly Instructions

Reflux still design and discussion

T500 Assembly Instructions

Postby Slim_pickins » Wed Sep 14, 2016 10:26 am

Hi all. I just bought a T500 on-line and it was delivered this morning. The seller listed it as brand new, but it has arrived looking very secondhand with grubby fingerprints all over it and a few scratches too. That is not why I'm posting here though. It has arrived without any documentation which shows how to assemble it. I was wondering if anyone here might be kind enough to scan their instructions and post them for me? It's a bit like trying to put a jig-saw puzzle together without a picture on what the finished article should look like.

Thanks in advance.
Slim_pickins
 
Posts: 14
Joined: Mon Jan 11, 2016 11:15 am
Location: Tropical Queensland
equipment: AirStill

Re: T500 Assembly Instructions

Postby WTDist » Wed Sep 14, 2016 10:27 am

the video is on still spirits website, also youtube :handgestures-thumbupleft:
WTDist
 
Posts: 2
Joined: Sun Oct 05, 2014 11:32 am
Location: Brisbane
equipment: Building a 4" bubbler with 8" glass thumper

Re: T500 Assembly Instructions

Postby Slim_pickins » Wed Sep 14, 2016 10:37 am

Thanks. I'll do a search.
Slim_pickins
 
Posts: 14
Joined: Mon Jan 11, 2016 11:15 am
Location: Tropical Queensland
equipment: AirStill

Re: T500 Assembly Instructions

Postby Doubleuj » Wed Sep 14, 2016 11:56 am

Just ignore anything they say about how to run it
Doubleuj
Lifetime Member
 
Posts: 3630
Joined: Fri Jan 16, 2015 7:15 pm
Location: rockhampton qld
equipment: 4" stainless glasser

Re: T500 Assembly Instructions

Postby rumdidlydum » Wed Sep 14, 2016 1:07 pm

Be carefull if it looks second hand!
There may be a reason why, a possible return from a previous owner to the supplier that has off loaded it to you :think:
rumdidlydum
 
Posts: 2619
Joined: Sun Oct 27, 2013 7:20 pm
Location: CQ
equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs

Re: T500 Assembly Instructions

Postby WTDist » Wed Sep 14, 2016 1:34 pm

Post some pics for us to see
WTDist
 
Posts: 2
Joined: Sun Oct 05, 2014 11:32 am
Location: Brisbane
equipment: Building a 4" bubbler with 8" glass thumper

Re: T500 Assembly Instructions

Postby Slim_pickins » Wed Sep 14, 2016 7:32 pm

I will post when I get a chance. Got a bit on over the next four weeks. The two washes should be ready by then.
Slim_pickins
 
Posts: 14
Joined: Mon Jan 11, 2016 11:15 am
Location: Tropical Queensland
equipment: AirStill

Re: T500 Assembly Instructions

Postby Cheersbigears » Thu Sep 15, 2016 8:42 am

Hey there do you still need the manual I have the one with only one temp gauge. If you need it let me know.
Cheersbigears
 
Posts: 143
Joined: Sat May 07, 2016 1:43 pm
Location: Nth QLD
equipment: Built up to a FSD 4" Eliminator and a homemade boiler

Re: T500 Assembly Instructions

Postby Slim_pickins » Thu Sep 15, 2016 8:52 am

Cheersbigears wrote:Hey there do you still need the manual I have the one with only one temp gauge. If you need it let me know.


Thanks for your kind offer, but I've now viewed the videos and I'm pretty sure I can put it together, but if I do have problems with putting washers in the right place I'll PM you. The boiler will be delivered today too. That is from a different supplier. I suspect the column cam from someone who has upgraded their column. Might even be a member here....lol. Anyway, I'll get on with it.
Slim_pickins
 
Posts: 14
Joined: Mon Jan 11, 2016 11:15 am
Location: Tropical Queensland
equipment: AirStill


Return to Reflux Stills



Who is online

Users browsing this forum: No registered users and 10 guests

x