Zak Griffin wrote:Looks good to me!
You won't need to use 2" x 3/4" x 2" tees for the shotgun though, unless you happen to have a couple laying around!
woodduck wrote::text-imwithstupid: there's no need for the T's just drill and solder. Check out this thread it might help
viewtopic.php?f=41&t=3087&hilit=shotgun+condenser
Also i would go for 1" tube for the parrot body 3/4" is a bit small and will end up bouncing on you due to the hydraulic effect.
Are you doing a boka type coil for your reflux side of things? If so are you just putting it in the column or will you have a different head that will be interchangeable?
So good luck with your build mate and if you have any questions don't be afraid to ask we love build threads around here :handgestures-thumbupleft:
woodduck wrote:...I wouldn't bother making an rc (reflux condenser ) for this 2" rig I'd leave that for your future bubbler, I'd stay with the coil idea.
There's some build guru's around here so I'm sure someone has tryed what your proposing. ...
woodduck wrote:Why not just use 4" instead of the 2" then? I guess may aswell just throw a few plates in and you've got a bubbler.
Up to you mate, all depends on what you want and your budget i guess.
WTDist wrote:Havent read the whole thread so if i miss something then my bad but with the coil i would say it would be fine permantly inside. its nearly exactly the same as i plan on making mine. im just taking the plastic cap on a t500 off and adding 2 90degree bends with a 2inch condencer with 7 inner 1/2".
Read this thread for more info by bt1 theres a bit of info on column height coils etc that can help. its 4 pages :handgestures-thumbupleft:
woodduck wrote:
There's some build guru's around here so I'm sure someone has tryed what your proposing.
Good luck
RefluxEd wrote:woodduck wrote:...I wouldn't bother making an rc (reflux condenser ) for this 2" rig I'd leave that for your future bubbler, I'd stay with the coil idea.
There's some build guru's around here so I'm sure someone has tryed what your proposing. ...
Hi Zaximus,
If you are definitely going to have a bubbler, I'd recommend going the dephlagmator (RC) route. After all, a decent dephlag will condense all vapour going through it for total reflux. My old BOKA is now on the scrap heap, if I'd thought ahead like you, I wouldn't now have a useless coil doing nothing.
After all, why reinvent the wheel?
If you do it all in modular sections, you'll be able to have every configuration required. :handgestures-thumbupleft:
A few extra pieces like some 4 x 2 adapters and you'll be laughing.
Zak Griffin wrote:Not much use building a 2" shotgun RC for a future 4" bubbler, though...
WTDist wrote:Could always have 2 2" to 4" reducers to accomodate the larger 4" RC?
woodduck wrote:Why not just use 4" instead of the 2" then? I guess may aswell just throw a few plates in and you've got a bubbler.
Up to you mate, all depends on what you want and your budget i guess.
MacStill wrote:Honestly IMHO :handgestures-thumbupleft:
I wouldn't build a refluxing pot still, I would be building a pot for striping and spirit runs even if for your vodka still and spirit runs on rums etc etc ;-)
Zaximus wrote:MacStill wrote:Honestly IMHO :handgestures-thumbupleft:
I wouldn't build a refluxing pot still, I would be building a pot for striping and spirit runs even if for your vodka still and spirit runs on rums etc etc ;-)
So you reckon leave the pot as a pot and not put the RC inside? And just run as pot for stripping and spirit? Then I guess later I could think about building the bubbler.
Users browsing this forum: No registered users and 35 guests