Mad wrote:Has been suggested to make a pot type top to slip on the 3" with few bend pieces and have a 2" shotty connected to it for running pot mode. Would run much better than boka style pot?
Reflux when your talking product condensor ur meaning the leibig not the coil correct? Just had to read it twice as got lost. Got to talk to my boss today have found what looks to be 2" down the very bottom of a full skip as its not just few little bits need to get the ok to take it if i can even get it out....
Hillz like the suggestion functional will b highly considered
The product condensor is the last one before your product drips into your receptical.
If you have the parts, it's better to make up a pot still column. If you make your still in a modular style, you can use the same product condensor for both configurations.
After I built a 800mm long 2 inch shotty with 4 half inch tubes inside I haven't looked back. The leibig just couldn't cope on a fast pot still run. Now I can strip with all four gas rings blazing and the shotty is hot to 3/4 of the way down but still produces a cool product with a 4mm thick stream. The 1.2 metre leibig can only do the 2 inner rings but not at full gas flow.
The only trouble is that the connectors for making everything modular will most likely take you over your budget unless you can do the easy flange thing.