3 inch stripper ?

[YANKEE 'STILLER]

Guys, I have an extra piece of 3X24 copper laying around and thought I'd hook it up to my 2X24 shotgun and use it as a dedicated stripper on my 5500 watt 15.5 keg.

Keg has a 6 inch ferrule on top stepped down to 3 inch and I'm wondering what take off speed it might be capable of pulling.

Care to take a guess ???

Thanks, guys. YS.

[benpandaae86]

6l per hr on 10% wash
9l per hr on 40% low wines

Im gonna make a 4inch stripper all the best on ur build mate

Happy stillin

[YANKEE 'STILLER]

Thanks mate. What do ya think yer 4 incher will pull on a stripper ?

[benpandaae86]

Its to go on a 80l boiler that im bout to start buildin
I was hopin for
10lph on 10% wash
15lph on 40% low wines

Some calcs say up to 24lph but that seems to quick
My 3 inch boka on 3600w can run at 6.5lph

[Zak Griffin]

Why would you be re-stripping low wines?

[maddogpearse]

Why would you be re-stripping low wines?

To make lower wines :D

[benpandaae86]

Ha ha i never thought of that its just what i put in the calc but if u dont have a bubbler and u want higher abv brown spirit dont u rerun it say to oak at 65% ???

[Zak Griffin]

Your hearts cut of a spirit run will end up needing watering down to 65% ;-)

[bluc]

Your hearts cut of a spirit run will end up needing watering down to 65% ;-)

+1 my hearts of spirit run are normally around 75-80%abv, usually 75%