A section for all electrical discussions, including controllers, elements, wiring diagrams & schematics.
Forum rules
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.
"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"
the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.
Regards,
aussiedistiller team.
by benpandaae86 » Thu Sep 17, 2015 8:19 pm
The only thing i was worried about was that its 110v not 240v (page 3 on the element )but im only a silly fitter i leave the wires up to my sparky mates
-
benpandaae86
-
- Posts: 712
- Joined: Sun Oct 19, 2014 1:22 pm
- Location: townsville fnq
- equipment: 50l keg boiler 3600w element power controler
Reflux with extension tower with adaptor for keg
2" SS pot still modified leibig condenser
next mission building the next one (probably a 4" bubbler)
by 1 2many » Thu Sep 17, 2015 8:29 pm
Have a look at 2.6, it state there is a relay at 240v 3Amp which is no good for switching elements
And there is a 12v output for cotrolling SSR's.
-
1 2many
- Lifetime Member
-
- Posts: 4215
- Joined: Sun Jan 27, 2013 6:08 am
- Location: Where the sun shines
- equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.
by benpandaae86 » Thu Sep 17, 2015 8:37 pm
The reason i got this one was because its for ssr's
-
benpandaae86
-
- Posts: 712
- Joined: Sun Oct 19, 2014 1:22 pm
- Location: townsville fnq
- equipment: 50l keg boiler 3600w element power controler
Reflux with extension tower with adaptor for keg
2" SS pot still modified leibig condenser
next mission building the next one (probably a 4" bubbler)
by 1 2many » Thu Sep 17, 2015 8:49 pm
Ok gotcha, yeah should be good. :handgestures-thumbupleft:
-
1 2many
- Lifetime Member
-
- Posts: 4215
- Joined: Sun Jan 27, 2013 6:08 am
- Location: Where the sun shines
- equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.
by rumdidlydum » Thu Sep 17, 2015 8:55 pm
All the ssr i have seen have a 3 to 24v input signal.
I have read in on the net that some ebay sellers describe they can handle ssr but when use it the relay burns out. The mod i mentioned earlier is easily removes the mechanical relay so that it can control the ssr. But that is for the rex c100.
I i have yet to get mine and mod. :D
Hopefully your pid is what you paid for. :handgestures-thumbupleft:
-
rumdidlydum
-
- Posts: 2619
- Joined: Sun Oct 27, 2013 7:20 pm
- Location: CQ
- equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs
by 1 2many » Thu Sep 17, 2015 9:03 pm
He doesn't need to remove a relay, Ben's device controls the SSR with out relay.
The relay is an extra output low current 240 volt switching.
-
1 2many
- Lifetime Member
-
- Posts: 4215
- Joined: Sun Jan 27, 2013 6:08 am
- Location: Where the sun shines
- equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.
by benpandaae86 » Thu Sep 17, 2015 9:44 pm
Does this mean i can adjust the power with this
Its off page 3
You do not have the required permissions to view the files attached to this post.
-
benpandaae86
-
- Posts: 712
- Joined: Sun Oct 19, 2014 1:22 pm
- Location: townsville fnq
- equipment: 50l keg boiler 3600w element power controler
Reflux with extension tower with adaptor for keg
2" SS pot still modified leibig condenser
next mission building the next one (probably a 4" bubbler)
Return to Electrical Hardware
Who is online
Users browsing this forum: No registered users and 11 guests