The Stig wrote:I would:
Do a full strip down
Clean all components
Replace all seals
Reassemble
Get rid of the braided hoses and replace with larger internal diameter hose.
.
Looking at the top side of the top clamp it looks like its been sitting for a long time unused and you have no way of knowing what the seals are going to be like.
The Stig wrote:No water means no cooling.
No cooling means no refluxing.
No refluxing means the plates won’t load correctly.
The internal diameter of the braided lines is way too small to deliver enough flow.
Get rid and replace : read http://aussiedistiller.com.au/viewtopic ... 36&t=12399
The Stig wrote:Yes, if the still is on so is the water - no exclusions :-B
Good move :handgestures-thumbupleft:
Return to Plated Column Stills
Users browsing this forum: No registered users and 60 guests