Brisbane copper pipe?

by **mitcho89** » Sat Jul 21, 2012 8:53 am

Hey guys,

Finally cracking the shits with commercial "hbs" distilling setups so I thought I'd have a crack at making a 1.5m total length 2" Boka. Anybody have a good idea of where to get copper of that size? So far I'm not having a great deal of luck!

Reagrds - Mitch.

by **Cane Toad** » Sat Jul 21, 2012 9:06 am

Hi mate,tradelink sell by the meter a d heaps cheaper than Reece :handgestures-thumbupleft:

by **bt1** » Sat Jul 21, 2012 9:27 am

+1 Cup,

add to that an approach to a single store like...

Gooday mate, i've err taken up a new hobby with several mates that needs plenty of copper( Look inocently upward) we'll be needing plenty of tubing, fittings etc over the next few months, so thought I'd pop in and ask for your best price on a few starter bits we need for the first one. Looking for your best price on ....

Post trans...thanks mate see you in a couple of weeks for the next lot....

bt1

by **mitcho89** » Sat Jul 21, 2012 9:48 am

Fantastic! Thanks for the help gentlemen. Does a 2" Boka sound a little too ambitious for a first though? I used to be into spud guns before brewing. Not the pvc and hairspray variety but 400psi pneumatic precision machined piston valved 1000fps variety! :D I'm more than used to working with copper apart from soldering but the amount of information around should make it easy, plus I have a few friends who are plumbers so I think I'm set! I can see the whole thing complete costing about 150ish. Sound like a ball park figure?

by **Cane Toad** » Sat Jul 21, 2012 9:55 am

I'm more interested in the spud guns :laughing-rolling: :laughing-rolling: wonder how'd they go with frozen lemons :think: :think:

by **Chocaholic** » Sat Jul 21, 2012 5:27 pm

I'd like to here more about the spud guns too Cupcake. OT I know, but some plans would be nice :whistle:

by **R-sole** » Sun Jul 22, 2012 4:57 am

I don't think it's appropriate to post plans here.

PMSystemWorksPunkin

by **MacStill** » Sun Jul 22, 2012 10:02 am

5Star wrote:I don't think it's appropriate to post plans here.

PMSystemWorksPunkin

Yeah use PM or even better email :handgestures-thumbupleft:

by **matty83** » Sat Aug 25, 2012 4:26 pm

Hi Mate,

Did you end up finding a good place to supply copper? I attempted to try TradeLink at Browns Plains today to see if I could find some 1/4" Copper Pipe. They dont do it... :-(

Regards,

Matt

by **micka** » Sat Aug 25, 2012 7:35 pm

i found that IMS on magnesium drive usually have some picked up bout 5 mtrs of 2 inch inch and half and inch for about 100 bucks all still look like new.

Brisbane copper pipe?

Brisbane copper pipe?

Re: Brisbane copper pipe?

Re: Brisbane copper pipe?

Re: Brisbane copper pipe?

Re: Brisbane copper pipe?

Re: Brisbane copper pipe?

Re: Brisbane copper pipe?

Re: Brisbane copper pipe?

Re: Brisbane copper pipe?

Re: Brisbane copper pipe?

Who is online