chipboy wrote:Simple automation, safety shutoff.
Put one in the liquid at a height that protects the elements, once it reaches the set point, turn off. Put a second if you must in the vapour but this is going to be a bit less reliable and lower temperature than the liquid. The heat source is presumably in the liquid.
chipboy wrote:Sam, not wanting to meet either hot liquid or vapour, both are particularly nasty!
Why would you prefer the vapour and why is it quicker, it will never be above liquid temp, laws of thermodynamics etc?
chipboy wrote:Agree Sam and its a stable temp source, so the only decision is the set point. I recommend 90-95 as this is prior to boiling where water coverts to steam expanding 1000 times its volume, this is where things get really bad=, things go to shit in a seriously bad way.
chipboy wrote:Sorry below distillation temp? I would have thought a point at which take off stops and flavours of tails are no longer wanted / required, what might his be?
Danbo wrote:What if you fell asleep waiting for the run to complete....
Users browsing this forum: No registered users and 51 guests