Cavemans 3" bok

Reflux still design and discussion

Cavemans 3" bok

Postby MacStill » Fri Jul 27, 2012 12:58 pm

Doing a low wines run borrowing Cavey's bok I built a while back, poor bugger due to work commitments hasnt been able to run it yet :snooty:

Anyway I thought I'd give it test run (it's had cleaning runs done) and keep some notes for him on how it performs, and also share the results with him tonight at my joint for a piss up. :))

Here tis heating up, got 4400w going through two separate circuits :dance:

P7272110.jpg


note the controller with neon blue lights :laughing-rolling:
You do not have the required permissions to view the files attached to this post.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Cavemans 3" bok

Postby stilly_bugger » Fri Jul 27, 2012 1:28 pm

Is this the T-in-a-plate type, like MR-E's charity auction build?

I'd be interested in your opinion about any differences between this design and the Double Reducer Bok.

I'm guessing the T-in-a-plate is cheaper to build. What about performance? Any differences?

Cheers.
stilly_bugger
 
Posts: 338
Joined: Sun Jul 03, 2011 9:05 pm
equipment: simple pot with worm on an electric boiler.

Re: Cavemans 3" bok

Postby googe » Fri Jul 27, 2012 1:40 pm

Looks good mate, good luck with it, hope it works good for you. Happy drinking tonight :mrgreen:
googe
 

Re: Cavemans 3" bok

Postby MR-E » Fri Jul 27, 2012 1:57 pm

stilly_bugger wrote:Is this the T-in-a-plate type, like MR-E's charity auction build?

I'd be interested in your opinion about any differences between this design and the Double Reducer Bok.

I'm guessing the T-in-a-plate is cheaper to build. What about performance? Any differences?

Cheers.


Depends on the driver, McStill's also got plenty of heat & control with his flash controller.
MR-E
 
Posts: 373
Joined: Tue Jun 12, 2012 4:58 pm
Location: Brisbane
equipment: Cooking on gas,50ltr keg, 3"Bok &
4" column with 6 perf plates

Re: Cavemans 3" bok

Postby MacStill » Fri Jul 27, 2012 1:58 pm

MR-E wrote:
stilly_bugger wrote:Is this the T-in-a-plate type, like MR-E's charity auction build?

I'd be interested in your opinion about any differences between this design and the Double Reducer Bok.

I'm guessing the T-in-a-plate is cheaper to build. What about performance? Any differences?

Cheers.


Depends on the driver, McStill's also got plenty of heat & control with his flash controller.


Add to that just a teeny little bit of experience :text-lol:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Cavemans 3" bok

Postby MR-E » Fri Jul 27, 2012 2:34 pm

McStill, to avoid flooding I used a 1" tee on my 3" build, what size is your throat section on this build. :?:
MR-E
 
Posts: 373
Joined: Tue Jun 12, 2012 4:58 pm
Location: Brisbane
equipment: Cooking on gas,50ltr keg, 3"Bok &
4" column with 6 perf plates

Re: Cavemans 3" bok

Postby MacStill » Fri Jul 27, 2012 2:47 pm

MR-E wrote:McStill, to avoid flooding I used a 1" tee on my 3" build, what size is your throat section on this build. :?:


This one has a 1.5" opening on the internal reducer, it's not a standard bok but I'll bet it's been :obscene-tolietpush: thought :obscene-tolietpush: of before :teasing-tease:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Cavemans 3" bok

Postby MacStill » Fri Jul 27, 2012 2:48 pm

Currently collecting @ 3.5 L/PH

I'll step it up soon
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Cavemans 3" bok

Postby caveman » Fri Jul 27, 2012 3:36 pm

Nice work Mac keep up the good work I'll be round tonite for sampling :D
caveman
 
Posts: 238
Joined: Thu May 10, 2012 1:49 am
Location: sandgroper state
equipment: 3" macStill boka
2" pot still with shotgun condencer (the swan with hotdog ) custom by mcstill
105L custom built s/s boiler with sight glass/fillport ,thermoport
Aces high thumper plate bubbler ( long term project)
building custom mobile boiler bench

Re: Cavemans 3" bok

Postby MacStill » Fri Jul 27, 2012 3:52 pm

I've already started the party :))

P7272111.jpg
You do not have the required permissions to view the files attached to this post.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Cavemans 3" bok

Postby MacStill » Fri Jul 27, 2012 7:19 pm

all done, pulled 11.5 liters @ 3.5l/ph for 95.2% ABV :dance: :dance: :dance:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Cavemans 3" bok

Postby MR-E » Fri Jul 27, 2012 7:27 pm

McStill wrote:all done, pulled 11.5 liters @ 3.5l/ph for 95.2% ABV :dance: :dance: :dance:


Nice :handgestures-thumbupleft:
MR-E
 
Posts: 373
Joined: Tue Jun 12, 2012 4:58 pm
Location: Brisbane
equipment: Cooking on gas,50ltr keg, 3"Bok &
4" column with 6 perf plates


Return to Reflux Stills



Who is online

Users browsing this forum: No registered users and 9 guests

x